Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Molding machine

Posts

Molding machine

#1

Molding machine

JohninRI

>Hello Gentlemen, Once again I need your help. Have any of you ever used a Williams and Hussey molding machine? Do you have any thoughts on pros and cons?

Thanks, John

Re: Molding machine

#2

Re: Molding machine

McKay

>I teach high school shop and have used the W & H almost every day for the last 15 years. Well worth the money in our situation. The molding is not as good as from a Weineg molder, but then the Weineg is close to $100000. I personally would not go to the asian knock off.

Re: Molding machine

#3

Re: Molding machine

Bill Sams

>John, I have a Bridgewood moulder, like the W&H, which performs great. I just finished a job in January requiring everything from 7" crown mold to 1-1/2" bolection molding. This molder worked great taking very light passes at the very last run.

If you are planning to run molding 8 hours a day, 4-5 days a week, then I would go with something much bigger as has been suggested, but for one-offs and short runs the W&H works great.

Try to catch the W&H reps at the TSI expo shows and test one for yourself. Good luck

Re: Molding machine

#4

Re: Molding machine

JohninRI

>Thanks Guys for the input. It is great to have this resource to get real working feedback. I am hoping to do some considerable molding work in my house and I'm weighing the cost of doing my own molding. Thanks again,

John