Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

bed frame

Posts

bed frame

#1

bed frame

Clay Foster

>I made a bed for our home from some of the railroad ties I got in South Africa. The legs are Rhodesian teak, with the weathered surface of the old ties on the outer sides of the legs. The inner sides are jointed smooth and square so the rails can be attached.

The rails are South African iron wood. The side rails are mortised into the legs; the end rails are attached with draw bolts so it can be disassembled.

The holes from the rail spikes are plugged with contrasting wood.


img

Re: bed frame

#2

leg 

Clay Foster

>


img

Re: bed frame

#3

Must way a ton

Dustmaker Mike

>very nice job. How did you get South Africa RR ties here? I like the look.

Re: bed frame

#4

Re: bed frame

Barry Irby

>Great looking bed. I really like your work!

Can you tell us a little about the Bench or table that is to the left of the bed, under the window? Are the stones attached to each other and the plank?

Re: bed frame

#5

Re: bed frame

Jim Moore

>Nice work Clay. Do you have plans to build any other furniture in that manner? A bedside table would be cool.

Re: bed frame

#6

Re: bed frame

Scott Greaves in Blackfoot Idaho

>I really like the simple design of this bed! It really lets the beauty of the wood show. The legs are a very cool touch! Are you using a conventional mattress and box spring? Are there slats underneath to support them? Would you mind terribly if I adapted your design?

Scott.

Re: bed frame

#7

Re: Must way a ton

Clay Foster

>A friend had rented a 40' container for shipping some other stuff and had room left over. Together we bought 32 uncut ties and 40 boards milled from ties.


img

Re: bed frame

#8

Re: bed frame

Clay Foster

>Thanks. I made the table about 5 years ago. The stones are pinned together with steel rods epoxied into holes drilled into the stone. The top is spalted wormy hackberry. The figure on the table is a loom pully I got in South Africa. It's missing its sheave. I was a weaving and textile design major in art school, so I like to collect things like that.


img

Re: bed frame

#9

Re: bed frame

Clay Foster

>Thanks, Jim. I think the next railroad tie project will be a sculpture made from one of the ties and a big rock.

Re: bed frame

#10

Re: bed frame

Clay Foster

>Thanks, Scott. My wife and I both like a hard bed, so there's no box spring, just a very firm mattress on 2x6 joists covered with 3/4" plywood. You're certainly welcome to adapt the design.

Re: bed frame

#11

Neat;; I like the bench and nite stand, too

Clint Searl, at the base of Haycock Mtn

>

Re: bed frame

#12

Re: Bed frame - Simple, yet elegant !! I like it.

Ray Carson - Lawrenceville, NJ

>

Re: bed frame

#13

Thanks

Barry Irby

>