Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Cutting heavy plastic

Posts

Cutting heavy plastic

#1

Cutting heavy plastic

jeff

>Hi all

On another topic.

I'm buiding jigs for a special project.

I have some 2" thick Delrin sheets.

I need accuracy in the cuts (all the jigs need to match up for alignment.)

Can I cut this on my table saw?

Do I use my Laminate blade or something else.

Jeff

Re: Cutting heavy plastic

#2

JL

Re: Cutting heavy plastic

JL

>I'd rather use a bandsaw or sabre saw myself and then clean it up with a plane.

Re: Cutting heavy plastic

#3

Re: Cutting heavy plastic

Ken Oakley-Sunny St. Cloud, Fla

>I have cut thick plastics up to 3" on a tablesaw using a good Triple Chip Grind,(TCG), 10" blade. I have a prefrence for blades by Forrest. You can also use a router with carbide bits. You can run it through a jointer, really clean up the cut with a good scraper. I made my own scrapers grinding old bastard files or a broken high speed steel saw blade. Been doing it since 1956 and this is what worked for me all those years.

Re: Cutting heavy plastic

#4

Re: Cutting heavy plastic

Virgil Johnson, Versailles KY

>I have jointed, sawed and planed delrin just as I would a piece of wood. You need to be careful drilling it as the helix of the drill will pull itself into the plastic.