Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Sawstop

Posts

Sawstop

#1

Sawstop

Patrick Schupbach

>I am upgrading from a contractors saw. I am looking at Sawstop, Powermatic and General. Is the Sawstop as good as they say(saftey features aside). Some posts say its nicer than Powermatic. Any feedback would be great. Thank You!!

Re: Sawstop

#2

Re: Sawstop

Thomas Skaggs, Foothills of Mount Level

>Performance-wise they are all about equal. Pick any of them and you'll get a great saw. If the added safety feature of the Sawstop appeals to you and you can afford the added cost then go for it. But as saws go, they are all excellent.

Tom

Re: Sawstop

#3

Re: Sawstop

Neal in San Jose

>I have had one for about a year and a half. I haven't screwed up and made it fire, yet, but I like the idea that it would if I prove that I'm human! The saw itself is the highest quality saw I've ever used, and I've used many. I sold a Jet cabinet saw when I upgraded, and a lot of minor fit and finish items were better, but it was sort of like upgrading from a Honda to a Lexus. Both very capable, but up to you if the added features are worth the extra cost. Installing a dado blade takes longer, since I have to change brake assemblys, so I now usually cut dados with a router.

One side benefit is that it constantly reminds me of safety, simply by sitting there in the middle of the shop. Kind of like trying to ignore a moose in my shop. I'll catch myself putting a hand in front of a chisel, or some other lunkhead act, and I'll stop and find another way to get the job done that doesn't involve a trip to the emergency room. Bottom line - would I do it again? Without hesitation. BTW, the Sawstop and a quiet shop vac are the only tools I've ever bought that SWMBO thought were good ideas.

Re: Sawstop

#4

Re: Sawstop

Barry Irby

>I don't have a Sawstop and have only seen one sitting in the show room.

What I do have 8is a thumb that I sawed into when I was a kid. For more than forty years I have lived with a slightly mangled thumb. The business with the finger nails seldom gets noticed.

Recently I managed to get the same thumb too close to the blade and got what amounted to a paper cut. Took a second or two to realize what I had done. The next senior moment might cost me a finger or worse.

If you think the Sawstop is expensive, ask some of the people here to post the pics of their injury and the Medical Invoices that went with them. I'm willing to bet that there is no one among them that would not have been happy to pay the $1000/1500 extra the Sawstop cost to avoid most of the injury. And the blade and brake are cheap.

I think the quality is very nearly equal among the saws you mentioned, but the safety features on the Sawstop are useless and have absolutely no value, until they work for you.

If I get the opportunity to upgrade my saw, it will be a Sawstop.

Re: Sawstop

#5

Re: Yes, it is that good

Dave Mount

>I replaced a 1990 vintage Unisaw with a SawStop a year or so ago. I made this change solely for safety, as I was in no way unhappy with my Unisaw. However, having gotten the SawStop, I have to say it is a nicer saw that the Unisaw was. Not by a ton, but noticeably. It runs smoother, it adjusts smoother, and the finish is better. The dust collection is better too. The Bies-type fence is well built and precise.

The riving knife was a huge step up. I had a microsplitter on the Unisaw, but I was always changing out throat plates when I needed to make a shallow, non-through cut. The riving knife hides behind the blade so it only very rarely needs to be removed, and even when it does, it's only a flip of a lever to remove it.

Only a couple things I'm not crazy about. One is that the throat plate is held in with an Allen screw which makes it take a little longer to remove it. Perhaps you could just leave that out if you wanted to. The other thing is that you can't run a dado without also changing out the cartridge (i.e., you can't just override the brake system to run a dado, you have to change the cartridge too). It's a small thing, but it just adds to the inertia of changing over to a dado.

I think it's a great saw and I can imagine you'd be disappointed with it.

Best,

Dave

Re: Sawstop

#6

Re: Sawstop

edward mccormack

>haveing just got my idex finger and tip of my thumb cut off i would go with the saw stop. Granted it was my own stupid mistake which caused it, the saw stop would have prevented this from happening.

Ed 9&1/4

Re: Sawstop

#7

Re: Sawstop

Jim Moore

>While I do not have a Sawstop at this time, I have seen it in action many times. It works as advertised. I know that the only way I would ever consider buying another manufacturer's saw would be if they began offering the same or similar option as the Sawstop has.

Re: Sawstop

#8

Re: I meant I *can't* imagine being disappointed

Dave Mount

>

Re: Sawstop

#9

If you can afford it.....Buy it!

Dan Manturi

>I am 60 years old and belong to a woodworking guild. Better woodworkers than me have lost fingers or parts of fingers to their saws. I must admit it scares hell out of me. I use the Gripper more and more. It will always happen too after you are working with teh saw for a while and get careless. I have seen this saw and heard it run. It looks like it is built like a tank. Simple answer - if you are considering it, you can probably afford it, so why not get the saftey? If I could afford it at present, I would have one over any other saw. No contest. I may be getting one in the future.

Dan M.