Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Beautiful firewood

Posts

Beautiful firewood

#1

Beautiful firewood

Cody Lewis in LV

>Here's a very valuable pointer. If you cut, sand, stain, and finish 3 panels for some cabinet doors on a project, they will be very beautiful, but if you made them 3/4" too short, you will have beautiful firewood and a lot of wasted time.

AAAAAAAAHHHHHHHHHHHHH!!!!!!

I was on the last few hours of a very fun project, and all the rest of the project is finished, but now I have at least 24 hours of cure time ahead of me (for 3 coats of poly). How frustrating....unless someone living in Vegas just happens to have some extra 14.25" by 15.75" panels sitting around that have red mahogany stain and 3 coats of satin poly on each side. Anyone???

Re: Beautiful firewood

#2

Re: Beautiful firewood

George@Colonel's Workshop-Havertown PA

>Don't feel like the Lone Ranger, Cody,

Save the short ones for the next cabinet project and design the cabinets accordingly. I never throw out otherwise good work. It is surprising how quickly it can be used or otherwise recycled.

George

Re: Beautiful firewood

#3

Turn those SOB's into BTU's

Barry Irby

>My best friend is a professional cabinet maker. He once made a set of "13 pane" doors that were about 3/4" too narrow. His father an I tried to console him and make suggestions about adding strips tot he edges or reworking the cabinet to make them work. He would have none of it. He grabbed them and smashed them to bits and threw them into the wood stove, announcing....I am turning these SOB's into BTU's!

Actually, I agree with the Colonel. Save them. Hit yourself over the head with them once or twice and move on. Make something to use them on, even if it is a shop cabinet. Actually, a shop Cabinet might be a good idea. Next time you make a set, look at the cabinet and think, I do not need another shop cabinet, I will calculate and cut more carefully.

Re: Beautiful firewood

#4

Re: Turn those SOB's into BTU's

Thomas S Stockton

>I prefer my .22 or if I really hate it my 357. Actually this is how almost all my shop cabinets happen either the door company made something the wrong size or the parts were out of the dumpster on a job site when I did a lot more install work than I do now

Re: Beautiful firewood

#5

I agree but....

Cody Lewis in LV

>Yes, I'm with you. I'll save them and I'm sure they'll save me time later, but, wow, it sure is painful when you first realize the mistake.

I wish I could claim my brain cells were dead from poly fumes inhalation, but obviously the mistake was made prior to the poly, so I have no cover.

I've already started the correctly-sized panels, but in the meantime, I'm still waiting for someone to show up with some completed ones. Something tells me I'll be making my own.

Re: Beautiful firewood

#6

Remember your first few sets of coped rails

Wayne

>

Re: Beautiful firewood

#7

Ah, I've been there

Stephen Kirk in Quakertown, PA

>I have some pieces laying around the shop waiting for me to do something that is a little smaller than the first project I intended them for. That's just aggravating, and I used to get really mad. Now, I just move on and start prepping more wood. Hopefully I won't make the same mistake twice.

One of my biggies was cutting some large plywood panels wrong. I had them rotated 90 degrees in the wrong direction on the table saw. Grr. Later they turned into a rolling cart for my table top drill press.

Grin and move on. Luckily tree keep growing.

Re: Beautiful firewood

#8

Re: Beautiful firewood

Bill White

>Dang it Cody. I just burned the ones that were too long.

BWAHAHAHAHA!

Sorry. I just had to be a smart a$$ 'cause it's late in the day.

Bill