Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Impact Driver Bits...

Posts

Impact Driver Bits...

#1

Impact Driver Bits...

Rob Hix - King George, VA

>Hey all,

A couple of weeks ago I picked up a Makita impact driver and drill kit (stealth gloat). This weekend I have been using the impact driver quite a lot and I have blown apart (literally) two Phillips driver bits.

Question is, are there special driver bits I should be using in this thing? If so, what do I look for when I go to one of the borgs to pick some up later this week?

Thanks for the help,

Rob Hix

Re: Impact Driver Bits...

#2

Re: The key is....

Grant Smith

>DON'T go to the Borg! Those bits aren't up to it! Even the ones with major tool manufacturer names on the package. I have tried DeWalt, Porter Cable, and other brands but have been disappointed.

You want to find your local industrial tool supplier (If you have a Borg store, there should be one in your town). These suppliers will usually have some drawers with a selection of industrial grade tool bits and often drill bits. Take along your drill index to get replacements for your bad/missing drill bits, while you are at it. I submit that whatever brand the pros are coming in to buy are pretty good grade.

I have found APEX brand bits last quite well in the four or so years I have used impact drivers. I have some that have lasted all that time, although occasional heavy use (3 1/2" screws, etc) will cause one to shatter on me.

Regards,

Grant in iowa

Re: Impact Driver Bits...

#3

JL

Re: McFeeley's *LINK*

JL

>I've had good luck with their bits - and they do carry Apex also.


McFeeley's

Re: Impact Driver Bits...

#4

You don't need.....

Mark Goodall - ATL - tooljunkie

>You don't need an impact driver to blow out bits from the orange borg.

Even the expensive DeWalts bits shatter as easily as the cheap Vermont American bits.... in my drill/driver. I can't imagine how bad they'd be in an impact driver.

I've had really good experince with the higher end bits from Bosch that I got at Lowes, if that helps.

Happy Woodworking!

Re: Impact Driver Bits...

#5

Re: You don't need.....

Rob Hix - King George, VA

>Thanks Mark,

The Bosch bit that I got from Lowe's looked like the best one that I found at the borgs. I picked up several different types. Then, when in use, the #2 Phillips that I had bought literally turned into powder before my very eyes.

I am sending LOML to Fastenal this morning to see what she can come up with. If that does not work, then I guess I will order some APEX from McFeely's.

Thanks all for the input,

Rob Hix

Re: Impact Driver Bits...

#6

Jason Roehl in Lafayette, IN

Another possibility...

Jason Roehl in Lafayette, IN

>I don't have an impact driver, but I have been using the bits made for Tapcons for some time now, and they last a LONG time for me. The package, as I recall has Philips II/Platinum/ACR 2 on it, and at the blue Borg, they are located near the Tapcons/fasteners section, not in the tools section.

Jason