Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Thanks to Incra and Taylor Design!

Posts

Thanks to Incra and Taylor Design!

#1

Thanks to Incra and Taylor Design!

Scott in Montana

>Somehow last night I broke one of the fence to rail clamping devices on my Incra TS III table saw fence. Still not sure how, but anyhow I called Woodpeckers, from whom I had purchased it, and the nice woman there referred me directly to Linda with Taylor Design Group who builds all of the Incra products in Dallas.

I told Linda that my fence was long out of warranty and it was most likely my fault anyhow. She looked up the part numbers and told me that she would send them right out. I offered my credit card information and she said it wouldn't be necessary, there was no charge. Now this isn't a hundred dollars worth of parts but I think it fair to say that there is $15 in parts and shipping. No matter, I wanted to recognize her and Incra for the refreshing customer service.

Scott

Re: Thanks to Incra and Taylor Design!

#2

Re: Thanks to Incra and Taylor Design!

Tom O'Connor

>Glad to hear that customer service is alive and well.

Re: Thanks to Incra and Taylor Design!

#3

I had a similar experience

Ken Garlock, Collin County Texas

>I had a loose pivot point on my 2000SE miter gauge. I too emailed Woodpecker and they forwarded my problem to the Incra people. A lady at Taylor Eesigns asked for my mailing address and sent a complete pivot assembly to me free of charge. Heck I would have been happy with just one part that would have fixed the sloppy pivot hole....

You may pay a little more, but you can't beat the service.

Happy sawdust,

Ken

Re: Thanks to Incra and Taylor Design!

#4

Re: Thanks to Incra and Taylor Design!

Rob Stokes in North Vancouver

>Glad you had a good experience. I've got an original Incra 2000 miter gauge, which I like. Except the fence isn't square to the table. When I brought it up to Incra, they told me to remove the fence, ad tape as a shim and re-install the fence. Repeat as needed until the fence is square.

Kinda turns me off when a nicely engineered product needs to be fixed (at the manufacturers request) by tape...

It is a nice tool though, and other than that issue, works exactly as advertised, every time.

Rob

Re: Thanks to Incra and Taylor Design!

#5

Re: Thanks to Incra and Taylor Design!

Steven Mellott

>The last time I moved, I lost some parts to my Incra table saw fence and had the same experience. Excellent customer service!

Re: Thanks to Incra and Taylor Design!

#6

Re: Similar experience

Larry Clinton At Frankfort (Central)., Indiana

>At the tool show in Indianapolis last fall I purchased the Incra 3000SE with the small sliding table - They had a show special and it was a darn good price. Well I got it home, unpacked it and part of the teeth were missing from the large dial - obvious defect from the machining operation. I was lucky that I had gone to the show on Saturday - I returned Sunday (a 100 mile round trip however), more than just a little irritated as the defect was quite obvious. The lady representative appeared pretty shocked herself and replaced it with a new unit. She then gave me 2 of the Mighty squares for my trouble. As retail cost for them was quite a bit more than my travel expenses I was satisfied. I have used the unit several times and am very happy with everything about it.

Re: Thanks to Incra and Taylor Design!

#7

Re: Similar experience

WRF

>Same here

sent me an entirely new fence when i reported old fence a little out of true

Re: Thanks to Incra and Taylor Design!

#8

Me too!

Dan Manturi

>Same experience here. I ordered a "special" from woodpecker and it was sent with a damaged measurement device. I called and offered to pay for a new one (it was a "special" after all) and they shipped the higer priced steel one free. Later, the clear plastic index part broke, and I offered to pay for a new one and they sent me 2 new ones for free.

GREAT customer service.

Dan M