Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

sharing the shop

Posts

sharing the shop

#1

sharing the shop

Jim

>My neighborhood has a shared woodshop that has gotten a bit rundown over the years. We are in the process of renovating and reestablishing a code of conduct that will keep our members safe, our tools in good shape and our shop clean. Can anyone share examples of how they address these issues in their shared shop?

thanks

Re: sharing the shop

#2

Re: sharing the shop

Thomas Skaggs, Foothills of Mount Level

>All I can say is that the last time I lent a tool to a neighbor it was a circular saw. And when it came back it had a shorter cord and a new piece of duct tape...if ya know what I mean. So sharing a whole workshop with my neighbors would be ugly. But I commend your neighborhood if you've been able to pull it off...well until now it sounds like.

Tom

Re: sharing the shop

#3

" Woodchips " . . .

steve mackay

>Woodworkers Club of El Paso, Inc. While I'm not a member I've had dealings with them quite a few times at shows and such. Good bunch and would probably be happy to help out. They've been around twenty years that I know of. You can hit it on Google.

Re: sharing the shop

#4

Re: sharing the shop

John K Jordan

>There's a business near here that rents time in a well-equipped woodworking shop. If you have something like that in your area, you might check with them as to how they operate and handle things like safety, housekeeping, and equipment acquisition and repair. They have to do it right or go out of business so it seems like their's would be a good model.

JKJ

Re: sharing the shop

#5

Insurance coverage?

Ray Newman

>W/ today's lawsuit prone society, I 'dunno' if I'd want to have a "shared shop".

Who's gonna pay if somebody removes a guard or does something stupid & cuts a finger(s) or a hand off....

Re: sharing the shop

#6

Ensure the rules are known up front

Charles R. Smith

>I've generally had a good experience lending my shop and tools to friends, almost all of whom leave it in better shape than when they started. I have always made sure of two things:

(1) they know how to use the machinery; and,

(2) they acknowledge that they are responsible for lost items, including my tools and their fingers.

My only bad experience was with a young chap from church who was just married and wanted to start a cabinet-making business. He needed a place to work and had no money, so I lent him my workshop. Unknown to me, he was doing everything with MDF, the dust from which plugged all the filters in my duct collector, shop vac, and air cleaner. He then coated the workshop and all its contents with 1/8 inch thick layer of MDF dust, which he didn't clean up because it had plugged all the filters. Unfortunately, I react to the dust and could not even go in my shop without getting an asthmatic attack. To make things worse, right after he finished using my shop, he moved away and left me with the mess.

Two years later he has moved back and I know he would like access to my shop. I'll let him back in, as his wife is pregnant and he needs work. But this time I'll ensure that the rules are clearly stated up front, including a ban on MDF. And he will have to clean up the shop beforehand, includng the residual MDF dust.

While I was frustrated with him, I also blame myself for not having more closely checked on him when I came home from work each day. I am several decades older than he is and even though woodworking is just a hobby, I've made enough mistakes to be able to offer advice to a less experienced person. By not being more vigilant, I let him make a mistake that was quite avoidable.

Charles (who has a soft spot for young men trying to start a woodworking career)