Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Jet Planer/Molder 13" Closed Stand Reviewed?

Posts

Jet Planer/Molder 13" Closed Stand Reviewed?

#1

Jet Planer/Molder 13" Closed Stand Reviewed?

Todd Nebel

>Has a woodworking mag or anyone reviewed the Jet 1 1/2 HP 13" Planer/Molder? I would like to upgrade from my Delta 12" portable planer to something bigger, stronger, better dust collection, and less snipe. I do not want a 3 HP 15" or larger model due to my workshop size and location (basement).

Thanks,

Todd

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#2

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

Mark Mandell - Gone Round In Jersey

>Todd,

I've had the JET 13 PM for about 10 years, although mine is open stand and blue [same machine]. 2-speeds (never use the high speed) with extension rollers. Machine has done fine, although you have to work to eliminate the minimal planer snipe. I use it to primarily hog off stock before going to the Performax for the final cuts.

Knives are easy to hone on the machine, and it has held its "tune" without issues. Hook it up to a DC and it do get pretty loud in the shop.

Anything is particular you're interested in?

mm

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#3

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

Herb Yost

>I've gotten very good use out of mine...have had it for about 6 years. I use the low speed, and there is no snipe if the infeed and outfeed rollers are accurately adjusted. Have yet to use it for molding, tho.

Switched from the HSS knives to the Esta knives...makes knife change a piece of cake, though there are are 6 screws (three ackwardly placed) that have to be removed from the hood in order to access the knives.

I also haven't quite figured out how to adjust the orange chip deflector so as to minimize chips coming out the infeed side of the unit, even with a good 4" dust collector running. Always have to give the floor a good sweeping afterwards. SInce this is the only large planer I've used, I don't know if this is unique to this unit or is typical of all planers.

As mentioned in a prior post, that thing is loud when it plus the DC are running. Ear protection is an absolute necessity.

13" has proven to be more than adequate for everything I've done.

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#4

115 or 230V?

Todd Nebel

>Hi Mark, Do you know if there have been any update/improvements in the last 10 years? Are you running yours on 115 or 230V? How good is the dust collection?

Thanks,

Todd

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#5

Re: 230

Mark Mandell - Gone Round In Jersey

>Dust control improved when I went to a 6" system, but the chip breaker still allows a few large pieces to get spit to the rear, but all the fines go up the pipe. It's not a big issue (we're talking something less than 1%).

These are fairly standard machines; I seriously doubt they've been changed. If they made a segmented cutter head, I'd seriously consider the upgrade.

After 10 years and several thousand bf, I check the alignment, but it has remained steady.

Hope this helps.

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#6

Alternative

Mark Mandell - Gone Round In Jersey

>Todd,

I got my 13" machine due to severe shop space considerations. But if you're looking to upgrade from a lunch box, for less than the closed stand 13 you can get the 3hp JET 16" clone of the Delta moving head planer which I saw on Amazon for less than the 13" PM.

heck it out through the WC link.

mm

Re: Jet Planer/Molder 13" Closed Stand Reviewed?

#7

Re: Happy with mine

Dave Arbuckle, Plano, TX

>Don't have a whole lot to add to what the other gents wrote. Unlike Mark, I run mine on 115V, it's fine with me. Mark must have one of the last of the blue models, mine is one of the first of the white ones and not much newer than his.

One time I fired up the planer without turning on the dust collector. Took it a few seconds, but it inflated the collector's bags. Kinda cute. ;-)