Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Veneer Press Question

Posts

Veneer Press Question

#1

Veneer Press Question

Ron Hildreth

>I decided it's high time for me to get into some veneering, considering I want to build a new L-shaped computer desk in the near future. I've looked long and hard at several options, everything from screw clamps, DIY built vacuum presses, and "store bought" systems. I've finally narrowed it down to just buying a "store bought" bag system, as I don't really want to take the time to hunt every piece I need to build one (though it would be fun, and someday might do!). After looking at several in Google and Copernic searchs, I've become a little confused as to which would be the best to buy, continuos run, ventri/compressor type,on-off regulated type, or ?. The frame style won't work because of limited space. The desk I plan to build will have a few 4' X 8' panels that I'd like to try a little veneering, plus a bunch of inlays I'm thinking of doing. With that said, any recommendations? BTW- budget is about $800-$1000 bucks.

Thanks!

Ron in Iowa

Re: Veneer Press Question

#2

Re: Veneer Press Question

Jesse Cloud

>Hey Ron,

Try placing a "Want to Buy" ad on some of the woodworking boards or your local craigslist. I know several woodworkers who have vacuum presses gathering dust.

Re: Veneer Press Question

#3

Re: Veneer Press Question

Dave Bair, Eaton Rapids, MI

>The latest FWW has a Q&A letter about using dried Titebond glue and a hot iron for veneering. Sounds like a low-cost possibility, unless you plan to do more of this work in the future.

Re: Veneer Press Question

#4

Re: Veneer Press Question

Thomas S Stockton

>Ron

Try Vacu pressing systems in Maine, for systems ready to go they are the best. Seems like they have something that would fit within your budget. I built my own pump and use their bags. if you can afford it polyurethane bags are worth it but I get good life out of the 30 mill vinyl, they seem to last 6 or 7 years in a one man professional shop. I would go for a system that uses a pump that automatically cycles on and off , I might look at a venturi system if I had a large compressor. Unless you plan on doing really long table tops an 8' bag will work fine.

Tom

Re: Veneer Press Question

#5

link didn't work

Thomas S Stockton

>try this address

www.vacupress.com

they also have a great forum that has a lot of info on it

Tom

Re: Veneer Press Question

#6

Re: Veneer Press Question

Earl Kelly

>I second Vacupress. If you can, bump up your budget to $1100-$1200 get the blue pump pro setup with the 4x8 poly bag. You won't regret the additional outlay. My setup is 14 yrs old and still kickin, after over 10,000 sqft of veneer glueups.

Earl

Re: Veneer Press Question

#7

Re: Vacuum Press

Wayne Carson "TX"

>I have a HVAC vacuum pump will it work for a vacuum press??