Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Writing desk apron question

Posts

Writing desk apron question

#1

Writing desk apron question

Lee Beeden

>I'm building an Arts and Crafts inspired Writing desk.

The desk sits on full 2 x 2 legs.

The apron that joins the front and back legs is 7" wide and 1 " thick.

I'm a little concerned about the cross grain connection here but am not sure how to deal with it.

Is 7" nothing to worry about?

What if I peg the joint?

All comments appreciated

Lee

Re: Writing desk apron question

#2

Re: Writing desk apron question

Moses Yoder in White Pigeon, MI

>You could just glue it in and hope it doesn't shrink enough to crack. Typically these would be joined with 2 tenons, the top tenon glued and pegged in permanently and the bottom tenon pegged with the peg hole in the tenon slotted to allow some movement. I think over 5" I would allow for movement and under 5" I wouldn't be as concerned about it.