Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Delta 14" bandsaw quality question

Posts

Delta 14" bandsaw quality question

#1

Delta 14" bandsaw quality question

Bruce, a MN Galoot

>I have a Delta 14" enclosed base, 1hp bandsaw that I bought on sale at Tool Crib a little more than 20 years ago. I've never had a problem with it. I know it's not a pro quality resaw machine but it does what I want. Fit and finish good, power good, runs without a hitch.

In reading other people's experiences with the newer models, it makes me think I got one of the last good ones.

Question: do I have one of the last good ones? When did they start their slide downhill?

Just wondering in MN,

too cold to do much else.

Bruce

Re: Delta 14" bandsaw quality question

#2

Not sure the year

Mark Goodall - ATL - tooljunkie

>But I got one of the last US made models which I bought sometime around 1999 IIRC. They did the grey models for years and years, did a year of those white ones in the late 90's and then went grey for a few more years, then they redesigned it and started making them overseas. From what I've seen, the newer models have the features that the old style was missing for 50+ years, like a quick-release tension lever, and a dust collection system that exits through a large whole in the back of the iron casting behind the lower wheel and other features. But the heftiness of the old-style castings and the guage of the steel and alot of other things seemed to be reduced, as did quality.

Oh and of course, price came down too. I think mine was over $800 at the time and you could add another couple of hundred in features (like the quick-release, etc) and now you can get all that for a bit over $500 or $600 I think.

Happy Woodworking!

Re: Delta 14" bandsaw quality question

#3

Re: Delta 14" bandsaw quality question

Ken Oakley-Sunny St. Cloud, Fla

>I bought mine about 10 years ago and my experience is the same as yours. Next problem will be the first.

Re: Delta 14" bandsaw quality question

#4

Re: Not sure the year

Barry Irby

>My Experience matches Mark's. I think I got mine in about 1999. Somewhere along the way I talked to Iturra and was lamenting that I did not get the dust port and quick release lever, etc they were putting on the new ones and his comment was "Congratulations, you got one of the last ones made in the USA, and the quality is substantially better than the stuff coming from off shore."

I have added a riser block, dust pickup and the quick release and several other things. Might have been cheaper to buy a bigger getter saw to start with.

Re: Delta 14" bandsaw quality question

#5

Re: Delta 14" bandsaw quality question

Robert R Clough - Thorncraft

>I bought mine in 1994 and agree with the above. It works fine.

Re: Delta 14" bandsaw quality question

#6

Re: Delta 14" bandsaw quality question

Scott in Montana

>I like many of the others here bought mine back in the 1900's and have never had a problem with it. I've made numerous updates to mine over time, but see no reason to replace it.

So far I've added the raiser block, dust collection, better tires, tire brushes, an after-market fence, Carter guides, a stronger tension spring, a link belt, a mobile base, the Highlands heavy spinner wheel for tension adjustment, and I'm thinking about the tension release lever. Hmmmm... I wonder what bandsaw I could have bought for the total cost of this saw and all these upgrades? I guess I just view it as a payment plan on the very good saw I have.

I agree, you have a great saw with a lot of flexibility. If I were to trade up it would be to a 20" machine or larger (drool, drool)... but then reality sets in, I just don't have the budget or the room... floor space or ceiling height. And then I would probably find the need for a smaller bandsaw as well. :O)

I'm very happy with mine.

Scott

Re: Delta 14" bandsaw quality question

#7

Re: Delta 14" bandsaw quality question

Jim Dillon

>Bruce,

If you don't have it already, you should get a catalog from Iturra Design (1-888-722-7078). It discusses changes in the Delta bandsaw over the years and compares the Delta to the Jet. I have a 14 inch Delta bought around 1997; it has been just fine and suits my needs. However, given what I have spent to ugrade parts, I would now look at the bigger bandsaws if I were shopping anew.

Jim

Re: Delta 14" bandsaw quality question

#8

Re: Delta 14" bandsaw quality question

Jesse Cloud

>Hey Bruce,

Interesting, isn't it, how many satisfied customers the Delta 14 inch has! I think there are two problems with it:

1)Inflated expectations - newbies think they can resaw 12 inches on it

2)Underpowered motors - I see them on Amazon sometimes with 1/2 HP motors.

I use mine every day and have gotten my money's worth and then some. Like others, I drool over the big guys, but its probably not going to happen.

Stay warm!

Re: Delta 14" bandsaw quality question

#9

Re: Delta 14" bandsaw quality question

Denis Ch�nard, Orl�ans, Ont.

>Bought mine in 1996 for CAN $700 (heck of a deal at the time, with the depressed Canadian $ and all). The comments here support my view of the machine, that it, it should be viewed as a kit, solid basic machine that lacks the bells and whistles one expects now. I swapped the motor for a 3 HP one, added link belt, cool blocks, riser block, Carter quick release, wheel brushes, made a fence for it, dust collection ports (standard port was useless). Now I have a machine that rivals or betters the 18" machines in terms of speed and resaw capability, for about what I would have to pay now for one of those big saws (but back then these large machines cost a fortune).

Sign of the times I guess, the current offering is made in China, and offers many of the features that I had to fit to mine, at a much lower price. I don't recall seeing a comparison between the US and Chinese made machines, but a few years ago Delta was selling both side by side, with the US machine costing double the price of the Chinese one...

A year or so ago FWW had a review of 14" bandsaws, and the Delta fared really bad. While I'm skeptical of the review for a number of reasons, my saw performs much better than the one in the review.

Bottom line, I am happy with my saw and see no reason to replace it, but if I were in the market these days for a 14" bandsaw I'd probably look at the Rikon.

DC

A local school was considering selling one of their US Delta saws, I told the shop teacher I was interested, but apparently they changed their mind and decided to keep it. Bummer...

Re: Delta 14" bandsaw quality question

#10

Re: Not sure the year

Rod Peterson -- Ormond Beach

>> They did the grey models for years and years, did a year of those white ones in the late 90's and then went grey for a few more years, then they redesigned it and started making them overseas.

You left out the “Platinum Edition” series. However, I can't remember if that was before or after the great white whales.

If memory serves, wasn't your Uni a PE?

Rod

Re: Delta 14" bandsaw quality question

#11

Re: Delta 14" bandsaw quality question

Roger Lance in GR, Michigan

>I also have a Delta 14" which is about 15 years old...has a 3/4 hp motor and no riser (on those rare occasions when I want to resaw I seek out someone with a larger saw and buy lunch)...placed a few updates on it like that aluminum dust collector fitting, cool blocks, tire brush, yellow tension spring, set of shim washers to get wheels co-planar, work light, etc...saw works just fine for the curve and other work I ask of it...but I also follow these discussions on various ww sites that ask "which 14 inch BS should I get?" and I'm amazed that the Delta 14 has all but disappeared from the discussion...I mean all these other saws are basically direct copies of the Delta and were rated as inferior to the Delta for a long time and now its the other way around...the times and things are changing and not necessarily for the better for the Country or the companies that use to make things here IMHO...wish Congress would hold hearings on the impact to us all on the lose of all these jobs and spend less time worrying about Roger Clemens...I'll get off this, time to shovel the snow.

Re: Delta 14" bandsaw quality question

#12

resaw 2x12

John K Jordan

>>...1)Inflated expectations - newbies think they can resaw 12 inches on it

I'm not sure what experience others have, but soon after I got my Delta 14" with riser that's exactly what I did.

We resawed a douglas fir 2x12 into four pieces to skin a post in a timberframe house. I used a new 5/8" blade with 4tpi. This was just after I'd tuned it carefully to make the wheels coplanar.

This board was 10' or 12' long, if I remember correctly. It took a while for the two of us (one on each end of the board) to make the three cuts but it worked fine. Only a few passes through the planer were needed to clean up.

If you have problems resawing with the Delta, perhaps something is out of alignment or the blade is not sharp.

JKJ

Re: Delta 14" bandsaw quality question

#13

Re: Delta 14" bandsaw quality question

Bruce, a MN Galoot

>I'm working nights this week, and I just woke up, sorry for the delay in responding.

I bought my bandsaw probably in about 1985-86, and I paid $600 for it on sale. It seemed like a good deal at the time, and in retrospect and particularly because of the change in quality, it seems like an even better deal now. However, I just might get the riser, stiffer springs and better release wheel.

I've never had a problem with it that I didn't cause, either by asking too much of the saw or too much of a dull blade. The only time I've had problems with blade tracking, I can attribute to bad alignment or dullicity.

I like my Neanderbuddy, and I'm sure glad I have one of the good ones.

Thanks everyone for the replies.

Bruce, (now off to blow the snow off the driveway that the snowplow so thoughtfully deposited there)

Re: Delta 14" bandsaw quality question

#14

Right, Platinum series

Mark Goodall - ATL - tooljunkie

>I can't remember wither... I think there was one year white, one year grey and then one year paltinum and then back to grey. It was pretty silly all those color changes.

No, I got a standard grey one. When I was buying I specifically had to look around because the most recent ones were strange (can't remember what it was.... either white, silver or had some sort of funky logo on the name plate with orange and yellow around the Delta name. I wanted as old fashioned and plain-jane as I could find and found a place with one with the more decent color schemes (standard grey with a black plate with white letters and a tiny bit of red trim) in stock.

That's what I got, basic and plain grey.

Why yes, I have half a dozen jeans, all the exact same color, brand and style. And over a half dozen dress pants, all black. Shoes? Black dress shoes, or white Nike. Sensing a trend? ;)

Happy Woodworking!

Re: Delta 14" bandsaw quality question

#15

Family joke…

Rod Peterson -- Ormond Beach

>Not so much the plain jane, but the brand loyalty. My wife is always trying new stuff, irritating the bejeesus out of me (hmmm, perhaps I'm on to something). I figure, if I've found something I like that does what I want, why should I go around trying stuff that usually doesn't work like I want it to, when I had what I wanted in the first place?

So, I've been using Charmin toilet tissue ever since it was introduced because, well, I probably don't have to explain, but it's certainly been over 35 years. I've been using Bounty paper towels even longer, I think…probably on the order of 40 years. Crest toothpaste…now there's a story—I've been using Crest for at least half a century. The only thing I don't care for is I can't seem to get the same product from one tube to the next…they are constantly changing it. Nevertheless, I stick with it.

I have other long term loyalties, as well—Edge shaving creme, Gilette razors (had a Track II for years—accidentally left it in a hotel—you can still get blades for it, but you can't buy a new one—now have had a Mach III for several years), Irish Spring soap, C-L-R rust/calcium remover, Joy dishwashing liquid, Calgon dishwasher detergent—I think you get the idea.

Whenever the subject of my brand loyalty comes up (SWMBO refers to it as lack of imagination), she always sums it up by saying, “Bounty, Charmin, Crest…”

Rod

Re: Delta 14" bandsaw quality question

#16

Ha!

Tony - Memphis

>I've had the same irritation over the toothpaste. I can't ever buy the same dang tube twice in a row. Takes me ten minutes to figure out which is what and I jsut want good old fashioned mint flavor Crest. Now there is three different color mints with all sorts of whitening and other crap.....arrhgg! Surprised nobody has gone postal over in the toothpaste aisle. Same for floss.

Tony

Re: Delta 14" bandsaw quality question

#17

Jason Roehl in Lafayette, IN

Thank God I'm not the only one...

Jason Roehl in Lafayette, IN

>...my list includes Bush's baked beans. No other brand comes close IMO. There is also a whole slew of recipes I like, some of them from Mom, and I'm quite happy with the way they are. But I love to try new foods--I'll eat just about anything at least once. If it's something that I don't have a particular affinity for, then I look into to tweaking it into something I like.

I have a Gilette Sensor handle that I've had since HS (15+ years), but I now use the Sensor 3 blades. I tried the Mach III, but couldn't bring myself to shave against the grain (tore the snot outta my face), and it didn't work with the grain.

Funny you mention toothpaste and it various concoctions. I have been using Colgate Tarter-control Gel for years, and my wife recently bought something different because she couldn't find the usual. She has already started on the new tube...I'm all but using a hydraulic press to get every last bit out of the old tube.

It also bugs me to no end that virtually all household appliances are pretty much disposable these days. They're built with no mind for repair or easy maintenance. My folks had a single toaster for upwards of 25 years, I think. My wife and I are on our third or fourth in half that time. The ones we junked were probably fixable, but by the time we would have shipped it back and forth or tried to track down parts and figure in the value of my time to repair, a new one is cheaper.

Jason

Re: Delta 14" bandsaw quality question

#18

Re: Delta 14" bandsaw quality question

Ron Jones

>I have the white Grand Edition (model 28-280)--new in June of '99. It was a package deal with a 1 HP motor, mobile base, enclosed base, rip fence and was about $850 IIRC. Seems like they only made the white ones for a year. It's a great saw.