Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Brush to Bench (pics)

Posts

Brush to Bench (pics)

#1

Brush to Bench (pics)

MN deepwoods (Dave)

>While in Arizona during January I built this love-seat. I used manzanita harvested from my sister's property approx. 20 mile NE of Tucson. It's a tight grained 'evergreen shrub' according to wicipedia. All I know is it snapped a few drill bits and is just shy of trying to screw into steel. This will sit in their 3 season porch (Arizona room) against the log home wall. The front seat support is made from the same log slat material which sides the house. The seat is just some left over 2x6s from the garage.

Any suggestions of "if" or "how" to seal this? They get the heat of the summer, and snow as they are in mountain foothills.

I built this in about 14 hours completing it literally 20 minutes before I left for the airport to fly back home to MN and 3 degree air temps. That's why I look so tired in the picture.

(I'll put the pic's up as soon as I figure out how. I have to downsize them.)

Re: Brush to Bench (pics)

#2

Picture 1 of 2

MN deepwoods (Dave)

>Here's the finished product.


img

Re: Brush to Bench (pics)

#3

OT - sort of - help with the photo???

MN deepwoods (Dave)

>So I have a nice hi-res photo of this bench. It's got 17,549,568 bytes and to post it I need to have no more than 80 kbytes. I shrunk the pixels down from 300 to 175 pixels/inch. Then I dropped the size down to about a 5x7" and still it was over 4,000 kb. Any pointers?

Re: Brush to Bench (pics)

#4

Re: OT - sort of - help with the photo???

Dan Donaldson

>reduce the picture to about 650 pixels in width, then use the compression to get the filesize down. Most editing software has the capability to do that. If you can't figure it out, send it to me and I will fix it for you.

Re: Brush to Bench (pics)

#5

Bigger Pic 1- hopefully 

MN deepwoods (Dave)

>


img

Re: Brush to Bench (pics)

#6

Bigger Pic 2 of 2

MN deepwoods (Dave)

>This is me resting on my sister's new bench, very tired after a short night. And, yes, I'm sporting my MN (gophers) hockey sweatshirt. Sorry Gophers for going south during hockey season. :-)

Dave


img

Re: Brush to Bench (pics)

#7

Re: OT - sort of - help with the photo???

Ken Adams

>Being that huge, it's likely an uncompressed bitmap (like, .BMP) file. You'll want to compress it. I use a free-download program IrfanView from www.irfanview.com/main_download_engl.htm. Open the BMP file and save as a JPG or PNG file. Try different compression (or quality) settings until you end up with a file size you can live with.

Re: Brush to Bench (pics)

#8

Ellis Walentine

Hmm, I think... *LINK*

Ellis Walentine

>...the file is so large because the picture was taken with a high-megapixel camera at its highest resolution setting. I don't know of any cameras that offer BMP format as an option, but many offer TIF and RAW format these days. Both these are lossless and take up a lot of bytes of memory. If you use a camera resolution setting that saves your pics as JPGs, the highest filesize you're likely to encounter is probably in the 5Mb - 8Mb range.

Regardless, though, when processing images for uploading or e-mailing -- where they will be displayed on a monitor -- the key to getting excellent quality is to first reduce the image resolution to 72ppi and then resize the image to the 500 - 600 pixel (long dimension) range. When you save this image, choose a JPG compression ratio that yields the smallest filesize at an acceptable picture clarity. Higher compression reduces the quality of the image. If you follow this advice, you should be able to easily get big, sharp images at well within our 80Kb limit. This cardinal picture is only 38Kb.

Our FAQs address photo processing, in case you want to read more about it.

Ellis Walentine, Host




FAQ: Photo resizing

Re: Brush to Bench (pics)

#9

Alan Young

Fun bench but UGLY Sweatshirt!

Alan Young

>GO SIOUX!


Re: Brush to Bench (pics)

#10

Can you feel the love?

MN deepwoods (Dave)

>Happy Valentines Day Alan! What number are you in that picture? Is that the Frozen 4 in Ohio? Were you there too? 8-)

My deceased (Oct '07) wife (of a year and 9 days) was a gopher fan. We went to numerous Men's Gopher Hockey games so I have a ton of garb. My best friend is also a gopher. I myself am a NDSU Bison alumni so that picture sort of hurts even worse. We (the two schools in ND) were enemies way back in the early nineties. I still like green. It just has to be matched with the gold of NDSU not WI (packers), or the white of UND.

Walking around Phoenix in that shirt I had several conversations with folks from MN who were visiting or had moved there. Small small world.

Dave

Re: Brush to Bench (pics)

#11

Alan Young

HEY BROTHER BISON! *LINK*

Alan Young

>First- very sorry to read about your wife's passing..my sincere condolences....

Well my allegiances are spread out -----

I am a native of Grand Forks- 0-18 years of age then graduated from NDSU 1978-1982.

Worked at the University of Michigan since 1984- So a wolverine fan-except for Hockey even though the program is always at or near the top.

That image came from UND's OT 2nd round win over Minnesota in last years NCAA tournament.

Alan

BS NDSU 1982


UND over MInnesota 3-2 OT