Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

The Robland X 31& LT18 bandsaw

Posts

The Robland X 31& LT18 bandsaw

#1

The Robland X 31& LT18 bandsaw

Scott MacMurchie

>I have read and will re-read Paul Jordans FAQs on the Robland X31,and found his insights and advice very interesting he mentioned that a man called Lou had sent him an update on this set-up proceedure and at the same time purchased LT 18" Bandsaw,very recently I called to ask them about the sping loaded clamping levers that came with the machine and was to the sales person I spoke with a couple of weeks back,there needs to be another way! any ideas out there and any advice on the best way to bring this machine into register would be very helpful.

Also the same for the LT 18" Bandsaw, Thankyou for reading this,Scott

Re: The Robland X 31& LT18 bandsaw

#2

Re: The Robland X 31& LT18 bandsaw

Kelby

>Scott,

I have both the X31 and the LT18, and they are an excellent combination when set up properly. If you will explain in more detail what information you are looking for, I'll be happy to help.

Re: The Robland X 31& LT18 bandsaw

#3

Ellis Walentine

Call Laguna Tools *LINK*

Ellis Walentine

>They are Robland dealers and probably have the tech support you need. They are also major sponsors of WoodCentral. Their toll-free number is 800-234-1976.

Ellis Walentine, Host


Laguna Tools