Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Wipe on Gelpoly

Posts

Wipe on Gelpoly

#1

Wipe on Gelpoly

Bob Sobieck

>I am finishing up on a cherry project and want to try the Gelpoly discussed in the most recent FWW article on finishing. Then the wax of course.

I have traditionally only used oil based stain with clear overcoat.

One thing is not clear to me in the article, is the Gelpoly product (made by petri) include any coloring? I can only find this name brand sold at www.highlandwoodworking.com and it does not appear to be colored.

I know I could wax with colored Fiddes, but am not sure if the end result will be darker than natural. I would like it to be a little more dark than natural for this project.

Does anyone else have a similar recommendation? I am going for "foolproof" as advertised in the article.

Bob in Green Bay

Re: Wipe on Gelpoly

#2

Re: Wipe on Gelpoly

Steve Schoene

>First, I suggest if you want the cherry a "little darker" that you just put it in a sunny location for a week, turning it regularly to give all sides an even tan. It's going to darken in any event, and the natural darkening process gives a much richer coloration than any simple process out of a can.

A coat of garnet shellac may be all the darkening you want. That's usually a good choice.

Using a stain with pigment is a receipe for disaster with cherry, since it encourages "blotching".

Wax over a varnish finish isn't going to have much darkening effect, except in crevices and the like where it isn't buffed off completely. You can't leave it on flat surfaces so there is almost no effect.

Re: Wipe on Gelpoly

#3

Re: Wipe on Gelpoly

Tony - Memphis

>Don't forget about the technique of glazing. There have been some god articles in FWW and others on glazing. One recent article showed the technique of creating your own glaze by mixing artist oil paint with a clear poly gel. I have used off the shelf gel stains as glaze and had real good luck with it. I built a cherry cd cabinet and used a mix of solid and plywood. The colors didn't match well. I used gel stains to even the colors. I think I used some standard Minwax colors on that project, but its been many years ago. You may have to do some experimenting to find what you are looking for. Good luck with it.

Tony

Re: Wipe on Gelpoly

#4

Re: Wipe on Gelpoly

Dave Bair, Eaton Rapids, MI

>I believe the darkening is a combination of the Sealcoat, poly and wax; each will give you a little darkening over the tone of the bare wood. (And yes, dark wax WILL have a noticable effect, even on flat surfaces).

I've used the process described in FWW using unthinned, quick-dry Minwax poly instead of the gel poly. I get the same results (including the tacky top coat if I take too long) as in the article. I'd never heard of a gel poly, just gel stains.

Re: Wipe on Gelpoly

#5

Re: Wipe on Gelpoly

Paul Mayer

>I recently gave gel poly a whirl and thought it worked fine, although it dried a bit slowly for my taste. Looks great though, and is absolutely fool-proof. I liked the results better than wipe-on liquid poly.

Re: Wipe on Gelpoly

#6

Polyurethane gel comes in colors

Michael Dresdner

>Lawrence McFadden, Rockler and Bartley (same company, actually) sell gel polyurethane in a range of colors. Buy whatever color you prefer. If you hit the right color but still want more finish, switch to clear after that.

Re: Wipe on Gelpoly

#7

Re: Wipe on Gelpoly

Jerry Samsen

>I've had good luck on Cherry using a 2lb shellac as sealer followed by gel stain. No problem with bloching. The gel stains are advertized as one coat (polyurethane based) but I still apply 3-4 coats of wipe on gel varnish.

Re: Wipe on Gelpoly

#8

Re: Wipe on Gelpoly

Bob in Green Bay

>I have never tried the gel stain. As of now I have about 6 samples going. I personally like the shellac sealer with wipe on poly over the the top. Waiting for some Fiddes colored wax to come in the mail to see how that looks.

My dilema, regardles of personal preference, my wife desires something darker than native cherry for the next project. I can't find something I like. I may try a gelstain - any recommendations? My intent would be to use the shellac sealer, then the gelstain then wipe on poly as you did, then after a week or so - wax.

Bob (with 8" more inches of snow last night in Green Bay)

Re: Wipe on Gelpoly

#9

Re: Wipe on Gelpoly

Jerry Samsen

>I've used Bartley's Gen Stain and a Rockler house brand successfully.

I've used the Bartley's Gel Varnish also as a top coat.