Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Thick cherry veneer

Posts

Thick cherry veneer

#1

Thick cherry veneer

Glenn Ashmore

>I need some 1/10" to 1/8" thich flat cut cherry veneer to finish up laminating trim pieces on my boat. I have worked through the stack I bought several years ago and don't remember who I got it from and can't find the original invoice. I do have a sample they sent and it has a logo that is a yellow sun with black spiked rays. Also a quote from Ralph Waldo Emerson but no company name.

Anyone remember who this is or have a source for thick veneers? I need about 100 sq. ft.

Re: Thick cherry veneer

#2

Re: Thick cherry veneer

Dick Coers

>certainly wood has 1/16" cherry. http://www.certainlywood.com/woodmenu-special-thickness.asp

Re: Thick cherry veneer

#3

Ellis Walentine

I hope it wasn't Flamingo *LINK*

Ellis Walentine

>They went out of business a few years back. There are many other veneer suppliers in Woodfinder, though. A few calls should find you what you need.

Good luck,

Ellis Walentine, Host


img

Woodfinder

Re: Thick cherry veneer

#4

Re: I hope it wasn't Flamingo

Glenn Ashmore

>It wasn't Flamingo. THis logo is a sort of oval orange sun with black rays around it. As I recall they were somewhere in the midwest but I have ordered wood from so many places I can't be sure.

Re: Thick cherry veneer

#5

Re: Well I found the invoice but..

Glenn Ashmore

>After sorting through 7 years of invoices I found Arising Sun Wood Products of Shippenville, PA. Really wonderful thick veneers but all the web links are dead and the phone # is not connected. Guess I will have to try Certainlywood unless someone has another option.

BTW, the boat project is at http:www.rutuonline.com

Re: Thick cherry veneer

#6

Don';t know where you are,

Keith Newton------WebKitFormBoundaryDZmgloT+ZiYFgX

>But you may want to find someone in your area with a band-mill to just turn some lumber, or logs into the material that you need. You can scroll down the left column of woodweb's home page to find a sawyer in your area.

1/10" green cherry could be ready to use in a couple of weeks. However I do like using the 1/16" plys for vacuum bagging bent laminations.