Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Vintage Jig Saw RPM?

Posts

Vintage Jig Saw RPM?

#1

Vintage Jig Saw RPM?

Tom MacGregor

>I got hold of an old belt driven Dunlap 18" Jig Saw. It has a fixed arm, the blade is driven by a small oil-filled crankcase. I found scanned operating instructions online which call for a 1725RPM motor with a 2-1/2" drive pulley, but it assumes the original driven pulley is still on the machine - it's not. Does anyone know either the desired RPM of the crank shaft or a reasonable range of strokes per minute to set it up for?

Re: Vintage Jig Saw RPM?

#2

Jim DeLaney, Austintown, Ohio

Re: Vintage Jig Saw RPM?

Jim DeLaney, Austintown, Ohio

>My Dad had one of those old Dunlaps. - I think it may still be somewhere in the basement of Mom's house. Anyway, as I recall, it had about a 4" pulley on it. When you hook it up, be sure it's rotating in the right direction - there's an arrow cast into the side of the saw - because if you reverse the direction it'll spew oil all over the place. DAMHIKT...

Jim D.

Re: Vintage Jig Saw RPM?

#3

Re: Vintage Jig Saw RPM?

Pete in Holland, MI

>4" sounds about right.

Re: Vintage Jig Saw RPM?

#4

Re: DeWalt DW788 operates at...

Al Stokka - Cambridge, Iowa

>"Does anyone know either the desired RPM of the crank shaft or a reasonable range of strokes per minute to set it up for?"

Tom,

The DeWalt DW788 scrollsaw is varible speed. The speeds range from 400 to 1750 strokes per minute.

Al

Re: Vintage Jig Saw RPM?

#5

Re: Vintage Jig Saw RPM?

del schisler

>wouldn't that be called a Scroll saw instead of Jig saw I thought a jig saw was the hand held unit ?? del

Re: Vintage Jig Saw RPM?

#6

Re: Vintage Jig Saw RPM?

Tom MacGregor

>These days it's refered to as a scrollsaw, the original literature identifies it as a jigsaw. Maybe hand held jigsaws weren't common (or around yet) when it was made and the distinction was made later to tell them apart?

Re: Vintage Jig Saw RPM?

#7

Right on. What now are called scroll saws

henthorn

>used to be called jig saws, I guess because they were probably used in cutting jig saw puzzles when they first became popular. What are now called jig saws were called saber saws when they were first developed. Later Sears and some others improved their saber saws by having a knob on top that was used to turn the direction of the blade making it easier to "scroll cut." The changes in names mentioned usually came about because the people making the products or selling the products were not as knowledgible as they should have been. The wrong words used in advertising gradually became the standard since many new tool users didn't know the true names either. That is how the language changes over the years.