Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

setting rollers on a beach drum sander

Posts

setting rollers on a beach drum sander

#1

setting rollers on a beach drum sander

Dan Long

>Hi I have purched a beach 42'' drum sander. It is completly restored now and am putting it back together It has a table with 3 feed rollers and two large rollers that are directly under the sanding drums. These large rollers (2 large 51/2" rollers) are the ones I am having trouble setting up so they can function the way they are suppossed to. I hope someone is familiar with this setup and can supply me with the info. I am at a stand still now.

Thanks Dan

Re: setting rollers on a beach drum sander

#2

Re: setting rollers on a beach drum sander

Barbara Gill, Remlik VA

>Dan, I can't help you with the adjustments however I have a question. Do your sanding drums oscillate as they turn? I have an old Beech drum sander and both of the flexible couplings have gone. I have been told the couplings no longer are made. To fix it I would have to invest in redoing the ends so the couplings which are available would work.

Re: setting rollers on a beach drum sander

#3

Re: setting rollers on a beach drum sander

Dan Long

>Yes mine will ossillate when I am done but not sure if I will run it that way. Gee if you could find a old machine you could use it for parts I got mine for 350.00. I know if I find anouter one I will get it just for that.

Let me as you this and maybe you can help me afterall does your machine have 5 rollers on the bottom with three being feed rollers and two being 5 1/2'' rollers that sit right under the sanding drums. These are the ones I am having trouble with the adjustment and asembly. I took the whole thing apart totally and stripped all of it every piece then I brought it in my basement and primed and painted it . It is looking great so far.

If you have these two large rollers I think you will be able to help me it would only be a visual thing. I had taken pic so this would not happen but my computer crashed and I lost them.

Thanks Dan

Re: setting rollers on a beach drum sander

#4

Re: setting rollers on a beach drum sander

Barbara Gill, Remlik VA

>No, mine has a conveyor like moving bed which feeds the boards through. The surface is a rubber type material.

Re: setting rollers on a beach drum sander

#5

Rick L

Re: setting rollers on a beach drum sander

Rick L

>Set them flush with the other rollers or you will end up with snipe.