Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Rikon 18" w/2.5HP motor, downsides?

Posts

Rikon 18" w/2.5HP motor, downsides?

#1

Rikon 18" w/2.5HP motor, downsides?

Craig Daymon

>Woodcraft has the 18" Rikon on sale for about a grand right now. Of course, I'd really like the MiniMax MM16, but that's a lot more cash. I wouldn't expect it to match the MiniMax, though I wouldn't mind, but how does it match up to the other competition? JET now has a 3HP 18"...for about $400 more. I just don't see JET as that different from Rikon. It seems all the 18" saws have changed a lot recently. Bigger motors, etc. Is the Rikon a good buy? I'll be resawing, cutting bowl blanks, pretty much anything you would do with a bandsaw...except perhaps meat processing.

Looking for advice.

Thanks,

Craig

Re: Rikon 18" w/2.5HP motor, downsides?

#2

JL

Re: Rikon 18" w/2.5HP motor, downsides?

JL

>I bought the 18" Rikon a while back. Generally I'm happy with it. The table is nice and massive. I like the two speeds. The tension "indicator" is nice and visible from the front of the saw. The factory blade was okay - but if you are going to be resawing, you'll get another blade. It was easy to assemble and set up (though it was a PITA getting it down around my house into the basement).

What I don't like is the fence. It is a bit on the light side IMHO. But then again, you aren't supposed to muscle a board through while resawing either.

Re: Rikon 18" w/2.5HP motor, downsides?

#3

Laguna LT16

JohnM in Mid Mich

>Consider the Laguna LT16. Great saw. Had mine a couple/few years. More than your budget at $1600, but a better quality saw. 3hp Baldor motor is a pleasure. I do a fair bit of 10-12" resawing, and outfitted with Laguna's "Resaw King" carbide toothed blade, I get great slices - apple, cherry, oak, yellow birch, etc.


img

Re: Rikon 18" w/2.5HP motor, downsides?

#4

Re: Rikon 18" w/2.5HP motor, downsides?

Dick Coers

>I've been looking at it myself. The one thing that has intrigued me is the way they mount the upper blade guide. It looks like that with a little surgery, you could get 15" of resaw capacity. You would have to cut a square opening in the top of the housing with a cutoff wheel for the guide to come up through, redrill the holes for the 4 mounting bolts, and redrill the hole on the outside of the housing for the tightening knob. With those changes the guide will mount 3" further up in the housing. If you look at the deluxe 14", they have an elongated plastic housing on top of the housing for clearance of the guide rod, just like I am talking about for the 18". You wouldn't be able to get the guide as near the table as before, but I seldom cut thin stock. I'm going to look at it again this Saturday and probably make the purchase. I'm doing the free Sat. demo at the Peoria, IL store. Payment for that will make it a LITTLE cheaper. LOL I've just used the one in their shop a couple of times. I'm going to cut a bandsaw box for the demo and will get a good feel.