Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Made another spool cabinet

Posts

Made another spool cabinet

#1

A.J. Hamler

Made another spool cabinet

A.J. Hamler

>I actually finished this earlier in the week, but did all the photo editing over the weekend, so I guess this qualifies as a "weekend accomplishment." This particular cabinet was made for a project article in an upcoming issue of American Woodworker.

I've made a number of these spool cabinets over the years (the first one I made is shown in Shop Shot #430), but have since had the opportunity to examine several originals firsthand and have refined the design a good bit. The cabinet is all solid oak with oak-ply side and rear panel inserts. The drawer fronts are solid oak, attached to poplar drawer boxes. Drawer bottoms are birch ply. The drawer decals came from Van Dyke's Restorers, while the solid brass knobs came from Horton Brasses. The cabinet is about 23" long, 19" deep and about 11" tall. The stain is General's "spiced walnut," and the final finish is satin poly.

A.J.


img

Re: Made another spool cabinet

#2

Lee Gordon

Re: Made another spool cabinet

Lee Gordon

>Nice cabinet.

Re: Made another spool cabinet

#3

Can you show

Dustmaker Mike

>inside the drawers the LOML wants me to attempt to make one as nice as you have.

Re: Made another spool cabinet

#4

Re: Made another spool cabinet

Moses Yoder in White Pigeon, MI

>I think there are probably a lot of people that are going to be interested in knowing which magazine that will be in. I don't subscribe to American Woodworker but can buy them off the newsstand; please sound the alert when it comes out ;)

Re: Made another spool cabinet

#5

Re: Made another spool cabinet

Chuck Lenz

>Very nicely done AJ.

Re: Made another spool cabinet

#6

Background Bolts

David Yoho

>A.J., that's one handsome cabinet. Very nice! I don't know much about sewing but would those be bolts in the background? Funny, I haven't seen any like those at my hardware store ;-)

Thanks for sharing,

David

Re: Made another spool cabinet

#7

Lee Gordon

Re: Background Bolts *LINK*

Lee Gordon

>For the "background" story on those bolts in the background, take a look at AJ's blog, particularly the entry entitled "What's Not to Like?".


AJ's Blog

Re: Made another spool cabinet

#8

AJ - reminds me of my Pa's store

Howard In Toronto

>My Pa owned a textile store.

The Coats agent used to stop in on a regular basis.

He always made a point of bringing POS material for me (that's point-of-sale, not the OTHER kind of POS) such as giant spools etc.

One time, he left a cabinet with my Pa to display thread; it was similar to yours, but nowhere near as beautiful as your work.

I've nailed up some of my Pa's yard-sticks in my shop and he gave my sons some empty spools before he passed away.

It's one way i have of remembering him and the largest part of his identity - his store.

Howard

Re: Made another spool cabinet

#9

Re: AJ - reminds me of my Pa's store

Bruce, a MN Galoot

>My grandma had a general store in eastern ND in a farming community. She had a Coats/Clark chest, somewhat bigger than the one in AJ's pic. My sister has it now, and I'll post it when she sends me a pic. I fixed the top, which was cracked and warped, some 25 years ago. It's still flat.

Bruce

Re: Made another spool cabinet

#10

Check This Out Mike

Rick Jackson,TN

>Found this on ebay, everything I saw had drawers like this. Hope this helps you get on your way to making one of these :) Rick


img

Re: Made another spool cabinet

#11

Alan Young

A handsome piece AJ. That would make a great

Alan Young

>tool Box.

Nice work. Thanks for posting.

Alan

Re: Made another spool cabinet

#12

Me Too!

Thomas Skaggs, Foothills of Mount Level

>My mother's family had a dry goods store for decades. Now, long since closed. But I have a spool cabinet from that store and I cherish it.

A.J....great job on yours!

Tom

Re: Made another spool cabinet

#13

A.J. Hamler

Re: Can you show

A.J. Hamler

>Hi Mike...

The drawers are exactly like the one in Rick's post. I've looked at a lot of spool cabinets, and the drawers are done with either nail-reinforced rabbeted corners or box-jointed corners. I used rabbeted corners on mine, but reinforced them with 3/16" oak dowels instead of nails.

The drawer face is separate and made of oak. The cutout for the label is done first, then routed with a 1/8" radius cove, then glued to the front of the drawer box. The labels in most original boxes were either glass with a decal affixed to the back side, or stamped metal as on the one in Rick's post. Since repro stamped label inserts are unavailable and/or extremely expensive if original, and since doing a glass insert is a bit impractical since repro labels aren't true decals, I eliminated that step. I created the cutout, affixed the drawer front, then applied the repro labels -- which are peel and stick -- into the cutout. The visual effect is the same. (There are also some originals that didn't have cutouts, but had decals applied directly to the wood.)

The cabinet in Rick's post is one of the more ornate ones -- there were hundreds of variations -- with the turned posts on the front sides, and the more elaborate cutout for the stamped labels. I don't think those are the original knobs on the one in Rick's post, though.

A.J.

Re: Made another spool cabinet

#14

A.J. Hamler

Bolts and bolts

A.J. Hamler

>There are bolts and there are bolts. You must be thinking of bolts, but I took the photo at the local sewing shop, so these would be bolts, not bolts.

Look at the clock! I'd better bolt.

A.J.

Re: Made another spool cabinet

#15

A.J. Hamler

Cracked tops

A.J. Hamler

>Cracked tops on these things are quite common. From what I can tell from all of the originals I've examined, no consideration was made for seasonal movement in attaching the top -- they were just screwed on from underneath. Of course, since the top is only about 18-19 inches deep, you're not going to get a lot of movement to either side of the center anchoring screws (only about 9-10 inches on either side of the center screw will move). I put my tops on by putting the center screws in normally on each side, but I elongate the screw holes slightly in the attachment cleats everywhere else. The top is secure, but those elongated holes allow for whatever movement occurs.

A.J.

Re: Made another spool cabinet

#16

A.J. Hamler

Re: A handsome piece AJ. That would make a great

A.J. Hamler

>Not sure what I'm going to do with it yet, Alan. I had no real need for one just now -- nobody in the family or elsewhere has been clamoring for one -- so for the time being it's just sitting in my shop.

A.J.

Re: Made another spool cabinet

#17

Re: Cracked tops

Bruce, a MN Galoot

>the center screw anchor, end ones floating is what I did.