Makita air compressor "out of box" review.
Virgil Johnson
>About a month ago I posted a message here asking for advice on air compressors. After all of the kind replies I promptly ignored everyone�s advice on the brands they advised and bought a Makita MAC2400. Actually the advice given was good food for thought and after all of the replies I realized I could get by with a �hot dog� compressor. Space is at a premium for me and it will fit under the infeed table of my jointer.
I bought the tool (online) for 246.00 delivered from Tyler Tool in MS. The unit was delivered promptly via FedEx with no damage within 4 business days of order. Setup time was about 10 minutes and all that was required was adding oil (supplied) and installing the air filter. The air filter did fit interfere slightly with the plastic motor cover but did not cause any problems or vibrate like I feared. After a 25 min break in run with the drain valve open I closed the valve had 140 PSI of compressed air at my disposal with 2 minutes.
I chose the unit mainly because it was quieter than any units reviewed, had the same 90 PSI CFM rating (4.3) as the other comparable brands and I did not find many negative reviews in 96 reviews posted online. Most reviews remarked on how quiet this model was and I agree. Fit and finish were very good.
I�ll try to remember to post a 1 year review.



