Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Door bell

Posts

Door bell

#1

Door bell

Randy Johnson Connersville, IN

>My shop is kinda isolated and visitors are rare but they do show up every now and then.

A few weeks ago, back to the door, I was running the bandsaw and the DC was going. Suddenly, someone was just THERE. I'm lucky to still have five digits on my left hand.

Since that happened the door is locked while I'm working. If I'm turning, even my shooting and Who destroyed ears can hear a knock on the door. If I'm running the planer or router or anything else that requires hearing protection, I'm not going to hear even a pounding on the door.

What is needed is some kind of doorbell that will cause lights to flash. The sixth Habitat for Humanity house I wired was for a deaf couple and they got a wireless door bell that flashed a light in the living room. The trouble with something like that was that A. It was only one light, and B. I'm not sure it was bright enough that I'd notice it if I'm concentrating on something up close. I guessing that I will need something hard wired that will use a low voltage control to activate a 110 V circuit for a couple lights on each wall. I can do the electrical part of it, I'm just not sure where to look for components.

I briefly considered a buzzer like that used in some shops for telephones but that loud of a noise in a 28X28 building would have the same effect as someone startleing me.

I'm hoping someone here has done this and can point me in the right direction.

Re: Door bell

#2

I think Radio Shack

Dustmaker Mike

>used to sell a Flashing rotating red light for that reason.

Re: Door bell

#3

Re: Door bell

John K Jordan

>>...I'm just not sure where to look for components.

I asked mr google to tell me about 'doorbell deaf' and he had much to say about lights and such.

Also, you can get a pager that will vibrate with the doorbell or other triggers. http://homecontrols.com/cgi-bin/main/co_disp/displ/pgrfnbr/503/sesent/00

Also, I think I'd lock the door to avoid the sneak surprise.

JKJ

Re: Door bell

#4

Re: Door bell

Tony - Memphis

>You could use X10 stuff to do what you want too. There are some good deals on X10 products on Ebay. I've had good luck with that source so far.

Tony

Re: Door bell

#5

Re: Door bell

Mark McC

>In addition to whatever bell or light you use maybe post a sign not to enter when the machinery is going, juts in case the door doesnt get locked.. I have had the same experience in my basement shop.

You're concentrating oni whatever and then suddenly someone is standing in the door...you're right it can spook you just enough to cause an accident.

Re: Door bell

#6

Re: Door bell *LINK*

fred in ct

>maybe something like this can be made pretty cheaply.


remote light for doorbell circuit

Re: Door bell

#7

Thanks to all

Randy Johnson Connersville IN

>I have some ideas and hopefully in a few more weeks that problem will be taken care of.

I'll post later on how I did it.