>Hi there, this is a cross post from the hand tools forum, please delete if this isn't allowed.
In my lawn, there is a cherry tree that was recently felled for expansion of a garden. I would like to know how one would go about making boards from the raw timber using hand tools. What tools what I need? How difficult would this be for a beginner?
>>...making boards from the raw timber using hand tools.
You mean sawing the tree into boards with hand tools? Yikes! That's the way it used to be done, mostly with a pit saw. One person would stand on top and the other in a pit beneath the log and they would operate a long ripsaw. The top guy would guide and the bottom guy would provide power and eat sawdust. I understand it took a considerable amount of experience to get straight boards.
This all went away with the advent of water/steam/electrical power. I would think duplicating this today would be a huge effort and a tremendous expense - you would have to get the saw somewhere.
I've also heard of people cutting boards with a rip version of the hand-operated two-man crosscut saw, but I don't know the details or how hard that would be.
It would be a lot easier to haul the log to a local sawmill or hire someone with a portable bandsaw mill to come to your site. The latter is not as cost effective unless you have several logs to mill. Either way, you will end up with straight boards with minimum waste.
You can also buy an inexpensive attachment to guide a chainsaw to cut boards from lumber, but this takes a special rip chain AND it wastes a huge amount of wood compared to a band mill.
BTW, if the tree was in or around a yard or fence line or elsewhere on a farm, be aware that it might have embedded metal or other objects which can ruin sawmill blades.
If you happen to live in East Tennessee, bring your log here and we'll slice it up on my sawmill just for fun!