Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Fireplace Surround

Posts

Fireplace Surround

#1

Fireplace Surround

Ray Johnson

>I am building a fireplace surround to go around our gas fireplace. So far, I have the framing done and the wallboard "tacked" in place. The surround is almost finished but not shown in the pictures. About 18" of wallboard will show on each side of the surround. That will be painted. I am building the mantle also.

Behind the wallboard on the left side is a gas shutoff valve. There is also one within the fireplace itself. I want to have access to the shutoff valve that is behind the wallboard.

One option I am thinking is to built in speakers along each side of the fireplace. They would be about 12" from each side of the fireplace and enclosed to eliminate as much heat from the FP as possible. That would give me the access to the valve, wiring, etc. Or I could just install some vent or screen panel to allow access.

We will most likely put an LCD TV above the fireplace. For that I need access for electrical and electronic wiring. I could add a small access (door?)behind the TV when we do the install.

Any suggestions as to installing speakers and/or access panel of some kind.

Thanks, Ray


img

Re: Fireplace Surround

#2

Re: Fireplace Surround

Mark Mandell - Gone Round In Jersey

>Ray,

Think you'd best contact your local code office and get a copy of their regs pertaining to your project. In my area they have definite specs re fire proof materials, location and isolation of wirings, shut-off valves, types of valves (pilotless electronic, etc.). Those regs are going to have a big impact on what and how you do (unless, of course, you don't have your house insured or mortgaged)

mm

Re: Fireplace Surround

#3

Re: Fireplace Surround

Ray Johnson

>I do have a permit and everything so far has been okayed. I know that there are issues re the heat, etc. All combustables are further

away than the regs and fireplace mfgr minimums recommend.

Thanks

Re: Fireplace Surround

#4

Just Checking |;-}}}

Mark Mandell - Gone Round In Jersey

>

Re: Fireplace Surround

#5

Ellis Walentine

Re: Fireplace Surround

Ellis Walentine

>Behind the wallboard on the left side is a gas shutoff valve. There is also one within the fireplace itself. I want to have access to the shutoff valve that is behind the wallboard.

One option I am thinking is to built in speakers along each side of the fireplace. They would be about 12" from each side of the

fireplace and enclosed to eliminate as much heat from the FP as

possible. That would give me the access to the valve, wiring, etc. Or I could just install some vent or screen panel to allow access.

If I read you right, you're talking about pulling out the speaker to access the valve? I guess that works if this is some kind of master shutoff that rarely gets used. Otherwise, I'd treat it as a design problem. Make a recessed box with a molding around it, with the valve stem poking out somewhere. Turn a nice ebony knob and make a detail out of it. I've done this with light dimmers and it's pretty sweet looking.

We will most likely put an LCD TV above the fireplace. For that I need access for electrical and electronic wiring. I could add a small access (door?) behind the TV when we do the install.

Hmm. I think there are two main choices: Either pull the wires you need (audio, video, cable, controls, whatever) through the drywall in advance, or install some kind of flush pull box with a conduit big enough to add or modify cabling needs later on. Figure that even if you get rid of the TV someday, you will still need to cover the cable interface somehow.

: Any suggestions as to installing speakers and/or access panel of

: some kind.

The way to install access panels in drywall, IMO, is to build a box of some sort (nice hardwood, if it'll be seen, or something non-descript if all you want is a door) that fits between the studs and comes out through the wall. Trim it with some kind of molding and make a door of your liking to fit in there.

That'd be my 2¢,

Ellis Walentine, Host

Re: Fireplace Surround

#6

Re: Fireplace Surround

Ray Johnson

>Thanks. I think about your options and others that I have in mind. Will post pictures when I am done.

Ray