Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

David Marks Miter Sled

Posts

David Marks Miter Sled

#1

David Marks Miter Sled

Dustmaker Mike

>Howdy all. I have been watching WoodWorks and I keep noticeing a Miter sled he use to cut perfect 45s. I was wondering if he made this or bought it? I like the large base and the hold down clamps on it. I don't have time to make all the neat jigs I want to, so sometimes it is just better to buy them, and this is one I would buy if I can find them.

Mike getting ready for three more weeks someplace other then home. But it will be a lot warmer and sunny there.

Re: David Marks Miter Sled

#2

Re: David Marks Miter Sled

jim gerus

>Plans are available on the David J Marks website also several of his show projects. Jim

Re: David Marks Miter Sled

#3

Not David Marks Miter Sled, but.....

Barry Irby

>Just saw one in a magazine that used a fairly large plastic drafting triangle. The hypotenuse of the triangle was against the fence and the ninety degree corner pointed at the blade. Clamps on the two forty five degree sides would hold the pieces snug to the triangle as the cuts are made. Drafting triangles are remarkably accurate and if you sequence the cuts so that matching or opposing pieces are cut on alternate sides of the triangle, any error in the setup would tend to cancel out. It appeared they only sawed into the corner of the triangle far enough to cut the work pieces. Perhaps I can rummage up the magazine if you are interested, it is current.

I have watched most of David Mark's shows but do not remember the sled well enough to comment.

Re: David Marks Miter Sled

#4

Sure

Dustmaker Mike

>I would like to see the plans, if you can find them. I really wanted to know if I could just buy one because of time constrants with me traveling and not getting enough shop time to build what the LOML wants let alone jigs and stuff I want.

Thanks

Re: David Marks Miter Sled

#5

Thanks been there

Dustmaker Mike

>to his site many time and this is the first time I saw he sells stuff. I normal head to the online videos and never looked at the navagation bar at the top. I guess it is a one of a kind sled.

Re: David Marks Miter Sled

#6

Re: David Marks Miter Sled *LINK*

Grant Smith

>Mike,

A few years back I bought a system for making miters from WoodHaven. I bought their model 4560K angle head kit to go with their model 4900 deluxe miter guage. The 4560K system allows perfect complimentary angles to be cut, such as for picture frames. You can also use this system to do tapers, tenons, etc.

They also make a more elaborate setup called the 4941 frame master. It is probably the type that David Marks was demonstrating. You can get many upgrades for that basic sled.

I have visited the WoodHaven manufacturing facility in Durant, IA. and was very impressed at all of their products, as well as the enthusiasm and knowledge of their staff. A small company who does contract manufacturing for Keller, and I believe Kreg as well, they make GREAT products and expremely well made.

I encourage you to download or order their catalog and look through it for all the great jigs you can dream of. One of the next tools on my list is their "Angle Ease" router base, which allows you to set your router up at an angle of other than 90 degrees to the workpiece. Imagine the profiles you can make with that setup and a good selection of bits.

No affiliation, just a satisfied customer and fellow Iowan...

Regards,

Grant in Iowa


img

WoodHaven

Re: David Marks Miter Sled

#7

Re: Sure

Barry Irby

>It's on page 14, Shop Tips of Issue 182 (March 2008) of "Wood" magazine.

Pretty simple jig.

Re: David Marks Miter Sled

#8

Lee Gordon

Re: David Marks Miter Sled

Lee Gordon

>I believe Marks designed the miter sled and originally built one for himself out of wood but because he uses it so frequently in his daily business, he had the aluminum one custom made by a machine shop.

Re: David Marks Miter Sled

#9

Re: David Marks Miter Sled *LINK*

Ron Hildreth

>If you're interested in just buying a miter sled, I've always been impressed with this one, made by In-Line Industries;

Ron in Iowa


Double Dubby

Re: David Marks Miter Sled

#10

Re: David Marks Miter Sled

Mike Fitterling

>David had a machinist friend make his metal mitre sled for him custom. It would be pretty easy to duplicate in plywood.

Re: David Marks Miter Sled

#11

Re: David Marks Miter Sled

Al Kalian

>As a fan of David Marks I've found that whatever he has, is worth having. Sooo, I decided that I would build a Miter Sled using David's as a guide. I had some MDF panels skinned with Formica as the base and some aluminum angle. I got a blade for the table saw to cut aluminum, a Tenryu Alumacut. The blade works great for cutting wood as well. Once I got it setup it cuts accurate angles every time in any type of wood.


img

Re: David Marks Miter Sled

#12

while we're on the subject of miter gauges

Geary from NJ

>Can anyone identify the tablesaw miter gauge that NORM uses on TNYWS? I think its European, it's not in any of my catalogs,and I'm thinking about trying it out. Geary from NJ

Re: David Marks Miter Sled

#13

Lee Gordon

Norm's miter gauge *LINK*

Lee Gordon

>Unless he's switched to something new (Rod will know), he not only uses the Osborne EB-3, it is available for sale on the New Yankee Workshop website for $126. (Link below)


Norm's Miter Gauge

Re: David Marks Miter Sled

#14

Re: Norm's miter gauge

Rod Peterson -- Ormond Beach

>> (Rod will know)

Yes, Norm's miter gauge list is pretty short, and they can be picked out at my Norm's Tools website. Check the Saw Accessories page.

He has used an original Rockwell/Delta miter gauge, the ubiquitous Delta 34-895 (both plain and with clamps), an AngleWright AW-30, and not one, but two Osbornes—he started with the EB2 and upgraded to the curent EB3. Not included in this listing (but present on the webpage) are the old and new panel cutting jigs (crosscut sleds), and the Beisemeyer version of a crosscut sled he used a couple of times. Although the Osborne is the one most frequently seen (and only on the Unisaw) in episodes of the last seven or eight years, all but the original Delta/Rockwell have been seen periodically as recently as the end of last season (and the 34-895 has been seen in the current season).

That should cover it. I guess that the question was raised means it's time for a periodic announcement of the existence of my Norm's Tools resource page at the link above. The answer to most similar questions can be found right there.

Rod

Re: David Marks Miter Sled

#15

Re: Norm's miter gauge

Dan Mitchell

>I have an EB-3 and like it a lot. It's also available direct from Osborne for $109.95.

Dan

Re: David Marks Miter Sled

#16

Here's the Osborne link  *LINK*

Dan Mitchell

>


Osborne EB-3

Re: David Marks Miter Sled

#17

Wow, very nice!

Tony - Memphis

>

Re: David Marks Miter Sled

#18

Thanks everyone for the great info

Geary from NJ

>