Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Table saw fence????

Posts

Table saw fence????

#1

Table saw fence????

Edward McCormack

>Hello everyone, OK I just got my oldmans old craftsman tablesaw and im looking to get a new rip fence for it. I was checking some out online, looked @ the BIESEMEYER from sears @ $465 and as well as i can tell this is one of the top-end fences that most swear by. I also found the 50'' Accusquare Rip Fence $250 and the Utility 50 Saw Fence $270 from Rockler.com. As well as the Incra LS32-TS TSIII 32-Inch LS Based Table Saw Fence Positioner which was reviewed in WOODSMITH 174 on Amozon.com for 460$.

Can anyone give me some pros and cons on any of these? Not having 500-600$ to spend on something that at this point is just a hobby. Going by the saying you get what you pay for. Would it be better to wait until A. its nolonger just a hobby or B. till the wife says OK.

Thanks for all your input.

Ed

Re: Table saw fence????

#2

Re: Table saw fence????

knotscott

>I've owned 2 Biese fence and a Vega, and have used the Mulecab Accusquare and a Shop Fox Classic. The Biese, the Vega, and the SF Classic are great. The Vega is a terrific value and offers a very functional microadjustment. The Biese and SF Classic are very similar and very expensive IMHO. The Mulecab is better than an old Sears stock fence, but is lighter duty than the others mentioned plus has to be slid to the end of the rails for removal...it does have some nice t-slots and accessories. If the t-slots appeal, check out the Shop Fox Aluma Classic from Grizzly...steel Biese style fence with aluminum faces.

I'd also check into the Delta T2...$150 from Lowes.

Re: Table saw fence????

#3

Re: Table saw fence???? *LINK*

pecker

>Maybe go over to the Ridgid forum and contact the guy who started this thread http://www.ridgidforum.com/forum/showthread.php?t=15375

He just replaced a Ridgid fence with a Biesemayer due to a small flaw in the Ridgid, so he is selling the old one. It was only a problem when ripping wider than 24", which you may never be doing, or you may be able to tweak it back into alignment. You could probably get it for under $100


http://www.ridgidforum.com/forum/showthread.php?t=

Re: Table saw fence????

#4

Look around? *LINK*

Lee Schierer - McKean, PA

>I just saw a Biesemeyer fence at Amazon for $266. (See Link) I love mine, but haven't used any of the others you mentioned. Mine is mounted on an older craftsman saw.

Lee


Biesemeyer Fence