Dustmaker Mike re: sage flooring wisdom
Andy Halterman: Finally some winter weather
>Mike,
Your plan sounds fine. A couple of cautions, if you shim underneath the 1/4" lauan, make sure you do a good job of getting it flat/even. Thin plywood will conform to any imperfections and can accentuate the problem. I'd recommend a staple/nail down product if possible in your situation. Easier to install and definitely easier to repair in the future should the need arise. Prefinished is fine. With a 1/2" thickness, engineered in preferable. Look for one with a thicker veneer just in case you would want to refinish down the road. I know you can get 9/16" stuff with almost an 1/8" veneer layer.
Armstrong owns Bruce. Bruce used (maybe still is?) to be grouped in with Hartco, Robbins and maybe one other brand when they were owned by Triangle Pacific. My experience with them on warranty issues can best be described as comical. So bad all you can do is laugh. One good example was when we had a 3/4 nail down prefinished that expanded horribly. My suspicion was overly dry wood. (they bake the finish in UV dryers that do a fine job drying both the wood and the finish) I questioned the rep about moisture content. He swore it was all 8-12%. I stepped out into the warehouse with a moisture meter, opened the end of a box and randomly checked a few boards. Averaged about 5%. Hard to guess why expansion was such a problem..........
Pay a little more and get something good. If you need advice on a product, put up a message here or shoot me an email. Just make sure you put WC in the subject so I know it's not some spam for a miracle pill that will make me, um, never mind. I'm back on the job most days now so it may take a bit for a response.
Good luck with your project.
Andy Halterman
9 degrees yesterday morning in Hendersonville, NC�



