Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Steam Powered Sawmill

Posts

Steam Powered Sawmill

#1

Steam Powered Sawmill

Mike Fitterling

>Thought some of ya'll might be interested in these pics on the old way they used to get things done. They are from Florida Flywheelers, near Ft. Meade, about 27 miles from me. They usually have these event three times a year.

I always loved to watch the sawmill operate, but this is the first time I remembered to bring the camera.

There were a couple days of rain, so the M-WTCA turnout was not very good. I still managed to bring home some rust, however. A 1917-1949 or so Disston crosscut panel saw with nib and a nice old D-30, from what I can tell, straight backed rip saw with thumbhole tote.

Here's what powers the mill--steam tractor.


img

Re: Steam Powered Sawmill

#2

Here are the logs waiting their turn. 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#3

Turning the log. 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#4

Some pics of work in progress: 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#5

Re: Some pics of work in progress: 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#6

Re: Some pics of work in progress: 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#7

Re: Some pics of work in progress: 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#8

Re: Some pics of work in progress: 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#9

Re: Steam Powered Sawmill

Rod Peterson -- Ormond Beach

>Cool! You gotta alert me when that kind of stuff is going on.

Rod

Re: Steam Powered Sawmill

#10

Fresh Stack of Lumber from the Mill 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#11

Of course, there were lots of old tractors and aut 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#12

Re: Of course, there were lots of old tractors and 

Mike Fitterling

>


img

Re: Steam Powered Sawmill

#13

Will Do!

Mike Fitterling

>Hi Rod,

Here's the next one:

Feb. 20-23, 2008

16th Annual Antique Engine & Tractor Show

Gates open: 8AM-5PM

Days open: Wed - Sat

Not a M-WTCA meeting but still lots to see.

Re: Steam Powered Sawmill

#14

Re: Cool

Brian in Brighton

>I kept looking for the Damsel in distress tied to the sled and getting ready to go into the saw. Then...a sound....music.....It's the Lone Ranger!!! He saves the girl. She gives him a big hug. He runs off into the sunset with..........Tonto?? :-(

Brian in Brighton

Re: Steam Powered Sawmill

#15

Re: Of course, there were lots of old tractors and

Rob Stokes in North Vancouver

>Very Cool!

I didn't see one piece of hearing or eye protection on any of those operators. Kind of odd...

Sure love to spend a day with them though!

Rob

Re: Steam Powered Sawmill

#16

Actually . . .

Mike Fitterling

>. . . the noise is not very bad at all. The saw is not loud and the source of power is very far from the operators--probably 40 yards or so. But eye protection would probably be wise. Only the saw operator has any protection in the form of a lexan window in front of his face.

Re: Steam Powered Sawmill

#17

Well that's an improvement.

Basil

>Most of the old sawyers just had a sack hanging over the blade for protection.

Re: Steam Powered Sawmill

#18

Re: Steam Powered Sawmill

M. McNamee

>There is a group up in the northern part of Michigan called the Flywheelers. I went to one of their events back in 2004. Quite interesting. When they announced the tractor parade was going to start in an hour, my wife wanted to leave. Really, who would think a parade of tractors would be interesting. We stayed and she was pleasantly surprised as the announcer had an interesting history of each tractor, the owner and the restoration. I have been wanting to go again, just no time in the schedule. Maybe this year.

Re: Steam Powered Sawmill

#19

Re: Steam Powered Sawmill

Thomas Skaggs, Foothills of Mount Level

>If I didn't know any better I'd swear those are pictures of a very similar mill here that is used at the Illinois/Indiana Tractor Days event each year. I have been invited to work on the crew. Some day I'll take them up on it. Hard work but fun!

Tom

Re: Steam Powered Sawmill

#20

Re: Will Do!

Craig Frasa

>Mike,

Do you have an address for the show? My dad in Frostproof loves old tractors.

Thanks,

Craig in Clarkston

Re: Steam Powered Sawmill

#21

Sure *LINK*

Mike Fitterling

>Contact Information:

Caretaker Telephone:

863-285-9121

Club Mail Address:

Florida Flywheelers Antique Engine Club

7000 Avon Park Cutoff Rd

Ft Meade FL 33841

The best thing to do is visit their website where there are schedules and other information.

The way I go is south on US Hwy 27 to the last (southernmost) turnoff to Frostproof. Turn right (west-opposite from Frostproof) at that intersection and drive and drive; it is in the middle of nowhere. Once there you can't miss it. The whole thing is really huge when you consider there is the "village," the campgrounds, the tractor pull track, parking, concession buildlings, and a gigantic flea market (A REAL fleamarket, not filled with new chinese stuff, but brimming with old rust).


Florida Flywheelers

Re: Steam Powered Sawmill

#22

I have one of those engines !

Pete in Holland, MI

>Actually, mine is a 1912 Buffalo Pitts and I use it every summer at the local engine show in West Michigan to power their sawmill. Lots of fun to stand around that great old "wood stove" on a hot summer day operating it.