Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Band Saw Tensioner *LINK*

Posts

Band Saw Tensioner *LINK*

#1

Band Saw Tensioner *LINK*

John Hoffman

>Hi guys,

I replaced the stock spring on my Jet 14" band saw with an Itura from Highland Hardware. The spring works great but I need a better tension rod. That little plastic handle is killing me!

Has anyone used the spinner 3 or any other quick crack tensioner? Ideas or opinions please....

Thanks


pic of quick crank tensioner

Re: Band Saw Tensioner *LINK*

#2

Re: Band Saw Tensioner *LINK*

JohnKJordan in East TN

>John,

Several years ago I bought one of these quick tensioners from the Woodcraft clearance table for my Delta 14" bandsaw. It was pretty easy to install.

I love it (coupled with the Itura spring). No more counting turns - just push the lever up to return to the previous tension. I notice some new bandsaws are coming with these installed.

BTW, although it does have a "blade changing" position, I do have to further release the tension with the knob when changing blades, but that's not often.

JKJ


quick tensioner

Re: Band Saw Tensioner *LINK*

#3

Re: Band Saw Tensioner

Scott in Montana

>I have the three spinner which I like very much. It weighs much more than I expected when I ordered it and the centrifugal force of the crank's mass aids in raising and lowering the tension of the blade.

I opted for a crank rather than one of the lever style tighteners because I am thinking of buying the Carter digital readout tension meter with auto shut-off if the blade breaks. Currently the auto-stop meter is not compatible with the lever style.

Scott

Re: Band Saw Tensioner *LINK*

#4

Re: Band Saw Tensioner

Barry Irby

>I just received a free promotional issue of Woodsmith magazine a few days ago. It has a "tip from our Readers" that shows a shop made lever that releases and tensions the blade. It is so simple as to be a Duh! moment for me. I wish I had seen it or thought of it before I spend the $150 for the Carter Quick release lever. You could build one in less than an hour at a cost of less than five bucks.

You might be able to look it up on WWW.Woodsmith.com

Re: Band Saw Tensioner *LINK*

#5

Re: Band Saw Tensioner

John Hoffman

>Wow I would like to see that!

Re: Band Saw Tensioner *LINK*

#6

Re: Band Saw Tensioner

Carol - now in NC Nebraska

>Go to their site. Click on sample issue on the left. Then clip on tips and techniques on the right. Then click on next page. And there it was. Complete with a downloadable .pdf file for printing. Worked for me.

Re: Band Saw Tensioner *LINK*

#7

Thanks Carol

Barry Irby

>I made it work too. Just like you said. I guess I should have done that myself before posting. What Can I say?

That's a neat idea. Easy to do and does not mangle the saw at all. Great idea.

Re: Band Saw Tensioner *LINK*

#8

Re: Band Saw Tensioner

Jim Dillon

>John,

In addition to the more sturdy spinner, Iturra Design offers a much better screw-thread rod (forget the name for this part) with special threading [forget that name too 8-( (Acme threading ??)]. Have them both (plus spring), and they all are a big improvement. I also finally sprang for the Carter Quick-Release and I got to admit it is well-made and handy. But, given its rather expensive price, I would opt for a good homemade version if I were starting over.

Iturra Design 1-888-722-7078

Jim

Re: Band Saw Tensioner *LINK*

#9

Re: Band Saw Tensioner

John Hoffman

>thanks Jim will give them a call.

JH

Re: Band Saw Tensioner *LINK*

#10

Re: Band Saw Tensioner

Ralph Turney

>I think this is a great idea...now I'm no mechanical engineer, but shouldn't the hole in the lever be a slot or an over sized hole so it can pivot? Or am I just missing something?

Ralph

Re: Band Saw Tensioner *LINK*

#11

Re: Band Saw Tensioner

Barry Irby

>I think you are right, the hole for the rod would have to be over sized or you would at least have to rock the drill back and forth to elongate it top and bottom to allow free movement. It also appears to me that you just remove the block on the right that supports the handle when the blade is tight. I would think you could make that slide back and forth or at least put a little chain on it to keep it from getting lost. I just went back and looked more closely at the article. He twists the handle. Clearly, that works for him, but I would have thought it easier if it just lifted straight up and down and you slid the support in and out. Whatever works for you.