Re: CAD re-visited
ScottS
>Art, I'm out in California which probably doesn't help you too much.
I suppose I should admit that I had some basic knowledge of 2D CAD before I attempted to use Solidworks. I've got the 2006 Student Edition. In my version, I can get to their tutorials by selecting "Online Tutorial" from the "Help" menu. Or on the right side of the window is a tool palette. The top icon looks like a house and has a tool tip that says "Solidworks Resources". Clicking it will open a panel that includes buttons titled "Making My First Part", "Making My First Drawing", and "Online Tutorial". The online tutorial in my version has a "30 Minute Lesson" that I started with. I then went on to do "Lesson 1 - Parts", "Lesson 2 - Assemblies", and "Lesson 3 - Drawings".
If you have some 2D CAD experience, those should be enough to get you started. Once I'd gone through those basics, I started looking at other tutorials that I thought might be useful or interesting. They tend not to be quite a good as the basics, but they're not too bad. Occasionally, it will take some time to find one of the buttons or commands that the tutorial mentions. Some of the more advanced tutorials seem to assume that you've
One thing to understand about Solidworks is that the usage model seems to be targeted toward mechanical engineers. The basic workflow is to create 3D parts. You then combine those parts into an "assembly", which is basically a 3D model of your object. And once you have an assembly, you can create 2D "drawings" that show the object from various different angles along with any necessary dimensions. So, if you wanted to create a table you'd start out by creating parts for a leg, the top, and an apron. Then you'd create an assembly that combined four legs, four aprons, and a top into a finished table.
In addition to the on-line tutorial, I also bought the book that my local community college uses for their introductory SolidWorks class. It's called "Engineering Design with Solidworks 2006" by David C. Planchard and Marie P. Planchard published by Schroff Development Corp. (www.schroff.com). Oh, my, is it TERRIBLE! I think it got pretty good reviews on Amazon, which probably means it's the best you can do. There's actually quite a bit of good content, but the editing and layout is very sloppy at times. They revise the book every year, to match the latest yearly SolidWorks release and it looks like the book is due for an overhaul.