Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Oak Tall Case Clock

Posts

Oak Tall Case Clock

#1

Oak Tall Case Clock

Rick Jackson,TN

>Finally finished the Oak Tall Case Clock I started sometime back prior to moving into my new shop. Built from plans from NYW, it took a while to save up the bucks for the movement. Once I had that, and I was in the new shop, that was the motivation I needed to complete the project. Over all 73" tall, all quarter-sawn white oak with 2 coats of General Finishes Salem Maple and two coats of semi-gloss wipe-on poly. I really enjoyed building this project,even though it tried my patience at times. The "works" is a Hermle cable driven, triple chime 8 day grandfather clock movement. Thanks for looking. Rick


img

Re: Oak Tall Case Clock

#2

Re: Oak Tall Case Clock

Howard Norman

>A great looking clock. I have built a lot of clocks over the years but never a tall case clock. Still on my list.

Howard

Re: Oak Tall Case Clock

#3

Very nice work, Rich.

Eddie Pacheco; San Jose, Ca.

>

Re: Oak Tall Case Clock

#4

Bart Goldberg

Re: Very nice work, Rich.

Bart Goldberg

>Rick,

Looks like you did a real nice job on that clock. I have to admit, I've been tempted to build that clock as well - I really like the mission style. Can you share any of the challenges that this project posed for you (other than saving up for the movement).

Thanks

Bart

Re: Oak Tall Case Clock

#5

Re: Very nice work, Rich.

Rick Jackson,TN

>Thanks all. Bart, the first challange for me was the "measured drawing" from NYW. This is only the second thing I have built using his plans. While detailed enough, you better have "skills" because there isn't a lot of step by step as you would get with some other plans. No big deal, just took some thought and it did help build my skills I think. Second was the cove moulding I cut on the table saw, I don't have a shaper or a router bit for that. I wanted it to be qswo as well, that by itself wasn't too bad, but I didn't make enough length the first time and couldn't duplicate the setup so had to remake it all. Most of the case work went together ok, I followed the drawings I'm sure to the letter but had to remake the dial face board 2 times, and it still didn't line up with the movement. Other than all of that it was all a piece of cake :-) Rick

Re: Oak Tall Case Clock

#6

JL

Re: Nice - I just wish I had the room for one...

JL

>

Re: Oak Tall Case Clock

#7

Very nice indeed!

Jim Dillon

>Rick,

I've built only one clock so far, a Shaker-style hanging design, and had a lot of fun doing it - and learned a lot doing it. I like how yours turned out and the mission style as well. Thanks for posting your nice accomplishment.

Jim

Re: Oak Tall Case Clock

#8

Re: Very nice indeed!

George@Colonel's Workshop-Havertown PA

>Thank you Jim,

For posting the pix, which I enjoyed. It does look very very good, and you'll have it in the family for another million years. QSWO is the only wood to use in that Shaker expression. As a matter of fact, my best friend and I layed in wood today for his next tall clock which we will build in my shop. I hope this effort of ours yields as nice a clock as you produced.

George

Re: Oak Tall Case Clock

#11

Re: PS, what's next?

Rick Jackson,TN

>Thanks Bill, whats next is a blanket/toy chest for a 5 yr old grand daugther who reminded me that " my sister has one, where's mine?" when I was up in Cincinnati for Christmas, so the shop is cleaned up and I bought the wood Friday, good project to get started today as it is 13* on this end of the state this morning. I also have plans for a Williamsburg Grandfather Clock (Klock-It) and I fully intend to build one for the 3 kids, no specific time table, just plans at this point.

Re: Oak Tall Case Clock

#12

Re: Oak Tall Case Clock

knotscott

>That's beautiful! I'd love to build one just like it some day.