Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Looking for info on building a kiln

Posts

Looking for info on building a kiln

#1

Looking for info on building a kiln

Geary from NJ

>I have an old green house carcase on my property and am thinking about converting to a wood drying kiln. I can't seem to find any info at the book store,sooooo I thought I'd tap WC's bank of knowledge. Anyone have a source or link? Geary from NJ

Re: Looking for info on building a kiln

#2

here ya go.....

Scott in Eastern Iowa

>.....woodweb.com

look in the sawing and drying forum area....tons of info there

Re: Looking for info on building a kiln

#4

Re: Looking for info on building a kiln

JohnKJordan in East TN

>Fine Woodworking published designs on both solar and conventional kilns, reprinted in their publication "on Wood and How to Dry It" and again in FW "Techniques". The book "The Conversion and Seasoning of Wood" also has kiln designs plus a tremendous amount of useful information.

JKJ

Re: Looking for info on building a kiln

#5

Re: Looking for info on building a kiln *LINK*

Gary Evans Tallassee, TN

>Hi Geary,

Just remember that you need to also study wood drying along with kiln design.

There are several good publications on both subjects available on the Forest Products Laboratory website.

Gary


Forest Products Lab

Re: Looking for info on building a kiln

#6

Try Popular Woodworking

Dave Bair, Eaton Rapids, MI

>This past fall or late summer, they had an article by John Wilson on his homemade kiln. Can't seem to find that issue, though. Maybe someone else can come up with it.

Re: Looking for info on building a kiln

#7

www.forestryforum.com

Bob Falk, Madison

>

Re: Looking for info on building a kiln

#8

Re: Try Popular Woodworking

Bob Lang

>The article was in the December 2006 issue.

Bob Lang

Re: Looking for info on building a kiln

#9

Thanks, Bob.

Dave Bair, Eaton Rapids, MI

>It actually seemed like I read it just yesterday instead of more than a year ago. Getting old, I guess.