Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Woodworking Magazine - question & help

Posts

Woodworking Magazine - question & help

#1

Woodworking Magazine - question & help

Robert R Clough - Thorncraft

>I have tried to download the issue specified! Apparently it has downloaded! However I cannot find it!! Before I e-mail Chris (in total frustration!!!) where could it be hiding? I have tried "search" with no results. I have looked through various download section in My Computer, and I have gone through my files in My Docs. I expected a box allowing me to choose where to place it.

Re: Woodworking Magazine - question & help

#2

Re: Woodworking Magazine - question & help

David Yoho

>What happens is it opens up a PDF file of the issue but YOU have to save it to your computer by clicking the "Save" icon in the Acrobat Reader screen to save it where you want it.

David

Re: Woodworking Magazine - question & help

#3

Re: Woodworking Magazine - question & help

Jay St. Peter - SoMD

>If you're using Firefox, select Tools->Downloads. Look at the "All Files Downloaded To". You can click on the directory and it will bring it up. Firefox is a little different than IE in that it downloads to a pre-selected directory.

Jay

Re: Woodworking Magazine - question & help

#4

Re: Woodworking Magazine - question & help

Christopher Schwarz

>Robert,

If you can't root it out from your hard drive, ping me in the morning and we'll get one in your digital hands...

Chris

Re: Woodworking Magazine - question & help

#5

Re: Woodworking Magazine - question & help

JohnKJordan in East TN

>If you Right-click on the link provided and choose "Save file as" you will get a dialog asking you where you want to save it. If you simply click on the link, it will open the PDF document in a browser window for reading but not save it on your disk unless you tell it to.

If you save it and can't remember where (I do that all the time), you might search for SEPT2004_WM.pdf

JKJ

Re: Woodworking Magazine - question & help

#6

Re: Woodworking Magazine - question & help

Rob Stokes in North Vancouver

>I went to the web site to subscribe and saw the $19.96 price tag was for the US only. It's $24.96 in Canada.

I've written them to find out why the difference - I though we were past this.

Excellent publication though - even if I don't subscribe I'll more than likely pick it up off the news stand.

Rob

Re: Woodworking Magazine - question & help

#7

Thanks all, got it.

Robert R Clough - Thorncraft

>

Re: Woodworking Magazine - question & help

#8

Re: Woodworking Magazine - question & help

Steve Shanesy

>Rob,

While it would seem obvious that the higher cost for Canadian subscriptions to U.S. magazines were tied to the exchange rate, it's far from the whole story. Our costs to deliver subscription copies in Canada are greater. Copies must be trucked into Canada because they can not be mailed from the U.S. When they arrive, a third party vendor handles them for entry into your postal system. Postal rates in Canada for us are greater than in the U.S. And I'm sure there are other factors that pile on as well. I've asked our circulation department to document these costs so we have the full picture to share with our Canadian readers.

Steve

(since I don't post often, former editor and now publisher of Woodworking Magazine and Popular Woodworking)

Re: Woodworking Magazine - question & help

#9

Re: Woodworking Magazine - question & help

Rob Stokes in North Vancouver

>Figured it might be along those lines. Besides, our chests are deflating a bit now as our dollar seems to be settling in just belows yours again. But it was fun while it lasted :)

thanks for the explain.

Rob