Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Sorta OT. AutoSketch users? JKJ?

Posts

Sorta OT. AutoSketch users? JKJ?

#1

Sorta OT. AutoSketch users? JKJ?

Carol - now in NC Nebraska

>My old version of AutoCAD makes my 'puter cranky and does weird things. It is basically a non-windows version running in a windows shell. If I have more than then the AutoCAD window up, trouble lurks.

That said, it is time to move on. I have tried SketchUp but it is not strictly a CAD program and causes my brain to be cranky. :) Because I have over 20 years of AutoCAD brain programming, I am hoping to find a CAD program that doesn't cost an arm and leg or cause me more brain cramps. My poor brain has been stained with AutoDesk thinking.

I want a CAD program that will allow import of .jpeg's (at least), and will allow dimensioning directly to the photo and text with leaders (arrows) pointing to specific areas of the photo. I'd like to shoot an area that I am designing a piece to fit into and then draw the item into that space. Sort of a drawing superimposed on the photo. I'd also like to circle an area on the photo and draw a leader to a CAD drawing of the details of that area.

When I say CAD drawing, I mean something that can be dimensioned and layered. And one with built in libraries of symbols of various trades and hardware. The libraries should be able to allow .dwg drawings imported from various vendors who offer that service. 3D capability would be a bonus!

Might AutoSketch be the solution? JKJ, you have any ideas if there is a product I might invest time and $$ in? It would also be absolutely wonderful if trial tutorials are available, either via the web or by downloading a trial version of the program.

Don't want much, do I? :)

The country preacher is looking for side work. I have an opportunity to expand on but I need to see if I can find the software that will make this happen.

Re: Sorta OT. AutoSketch users? JKJ?

#2

Re: Sorta OT. AutoSketch users? JKJ?

JohnKJordan in East TN

>Carol,

What version of Autocad do you have?

I tried AutoSketch once and it seemed OK but limited compared to Autocad. However, it did include most of the festures needed by someone who didn't do cad/modeling/graphics for a living. (This was a LONG time ago - today's version might surprise me.)

I'm not even much in tune to Autocad these days. I used to be fluent (started with Autocad version 1) but drifted away when I moved to dedicated 3D. 3D work required such a different approach that my brain must not have room for both! However, this made Sketchup easier for me.

Since I have not kept up, I can't make any recommendations. I did find a web site devoted to free and cheap cad which might be helpful: http://www.eland.org.uk/pages/Misc/cadnotes.html

That said, I have a full boxed version of Autocad LT 97 on my shelf that you are welcome to use if you'd like. (I did tech support for Autodesk/Kinetix/Discreet for years and they sent me copies of every think I asked for, half of is still unopened.)

LT 97 is an older program but if I remember correctly it was fairly complete although it will lack fancy 3D features. It should run on today's windows. My middle son used it on a laptop when he was in architecture school. I'm not willing to try installing it to test since I got rid of most of my computers when I retired and I already have a full version of Autocad installed on this machine. It is installed nowhere so I think it is legal to loan. I think it comes with tutorials. The box has the manual and all the original paperwork. I've never licensed it.

If you want to try it, it will easily fit in another one of those fixed-rate boxes. I may want it back someday, but you if you want to try it you can keep it for at least a year or so.

JKJ

Re: Sorta OT. AutoSketch users? JKJ?

#3

Re: Thanks, John. Others?

Carol - now in NC Nebraska

>Thanks, John. I have V.12. That goes back aways!

As for your offer, I will defer. The reason being that whatever effort I put into learning something new will be in something much recent. But thanks anyway. And the 3D option is also important to me.

I've looked at other CAD programs. I am really interested in talking with someone that uses AutoSketch - to pose those questions that don't fit on their forum. It seems if you don't do this 'professionally' they are loath to help out. Bunch of elitists! :)

Right now I don't have time to find a community college program where I can take some classes. Maybe next fall, but I'd like to get started sooner if I can.