Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>Good Morning!!

14 Jan 2008

I'm sorry to say that I didn't do any woodworking this weekend due to some extremely long work hours for the day job. I just don't do well on 20 hour work day any more. Seems like the older I get the less tolerant I am of very long working hours in the IT industry. But, it still pays the bills, and helps support my woodworking hobby.

Spent some lengthy time talking with the LOML about family stuff and we also made some plans for both our families (my parents and her parents) as they both will celebrate their 50th wedding anniversaries this year AND my FIL celebrates his 75th birthday. I admire my FIL a great deal because he has gradually been loosing his eyesite over the last 3 years. Just recently has he been declared legally blind and now can only read the large headline print of the local newspaper. He's a very good man with a huge heart and I love him. I just wish I could make his eyesite better for him.

If there's anything that I would ask of my fellow Creekers? It would be to always remember and make it a priority to spend time with your families.

Before I sign off, I'll leave you with this:

"There's no success in life that can compensate for failure at home".

So what did YOU do this weekend?

Best of weeks to you all.

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Mike Schwing from Md.

>Let's see...

invisible splinter in my left palm, despite a high powered magnifier and an x-acto knife. Might be wood, might be metal.

Dad and I were working in my shop yesterday, I laid my hanging flexshaft carver on the bench, not realizing it was still plugged in, then accidentally stepped on the foot control. The carbide bit chewed through an extension cord and started a spectacular fireworks show. Then as I had grabbed the handpiece to get it out of the way, my dad walks over and steps on the foot control, and the bur dug through my right palm! Of course if I'd have grabbed it with the right hand, it would have dug the splinter out of my left one! But no...

Re: WC Weekend Accomplishments.....

#3

Sleeper slicing

Clay Foster

>I cut up one of the railroad ties I brought back from South Africa. They call them sleepers. The wood is what they call Rhodesian teak. Very dense. The creosote coating barely penetrates the surface.

These planks will be for a bed frame. The tapered pieces will be the legs. I'll let them acclimate for a few weeks and see what they do, before I work them any more.


img

Re: WC Weekend Accomplishments.....

#4

Nothing so ambitious as David's floor (below)...

Rod Peterson -- Ormond Beach

>�but I did finish up the trim in the house by casing the final window which has been sitting unclad for 4� years now.

Here's what it looked like before casing it:


Here's what it looks like now:


And here's a detail of the bottom corner:


I don't know if you can tell, but I replaced the marble sill which originally went from jamb to jamb (typical Florida construction) with a longer one with more traditional horns (my wet saw came in handy once again). I was surprised�it was only about $16 at the box.

I wasn't able to do all the traditional proportions (sill vs casing, stool vs casing, etc.) because of the constraints of the cabinetry, although I think I'm going to redo the stool to make it longer (a little more support for the potentially fragile horns). The rosette is a half size version of the rosettes elsewhere in the kitchen around the doors, so architecturally the window is sort of tied into the rest of the openings, even if I couldn't decorate the casings with flutes or the like.

Would you believe SWMBO is an extremely happy camper?

Rod

Re: WC Weekend Accomplishments.....

#5

Something tells me ...

Mike Farinella

>a creosote ladened timber was no easy task getting by U S Customs.

Re: WC Weekend Accomplishments.....

#6

JL

Re: Shipping charges??

JL

>Out of curiosity - how much? Those don't look like lightweight hunks of wood.

Re: WC Weekend Accomplishments.....

#7

JL

Re: Nice change - but what happened to the text??

JL

>It was over in the "red" portion of the screen.

Re: WC Weekend Accomplishments.....

#8

JL

Re: WC Weekend Accomplishments.....

JL

>Took apart an "antique" footstool, drilled out the broken dowels, replaced dowels and glued it up again. Turned another rolling pin (jumbo size) out of cherry.


img

Re: WC Weekend Accomplishments.....

#9

Sketchup and cedar logs

Stephen Kirk in Quakertown, PA

>Well, I'm I finished the design process of a set of radiator covers for a client. I'm brand new to designing my own furniture, so this was quite an experience. I spent a week doing a lot of woodworking without ever setting foot in the shop. But, I sent the design over last night and they liked it. Now I can estimate and hopefully get to actually cut up some wood soon. The good thing is that I now know the whole project inside out and upside down, so I shouldn't have any real surprises when I start working. And, I should be faster on my next design.

Also, I was in the woods a lot cutting up some downed cedar logs. My wife marked them a few weeks ago into lengths to use for a bridge, so we cut and limbed them, then shouldered them out of woods to the creek crossing. Even laid them across to form a makeshift bridge until the my wife gets down to arranging the boards and putting planks on (yeah, this is pretty much her project, I just provide brute force when necessary). I fought doing it for a while (is it really necessary) but I think I'll like having a more accessable route too.

Re: WC Weekend Accomplishments.....

#10

Re: Shipping charges??

Clay Foster

>They aren't light. The sleepers were about 9' long and 10" square. I can barely lift one end.

The shipping didn't cost me anything, which is why I bought them. You can't get through life without good friends.

Re: WC Weekend Accomplishments.....

#11

Fixed ;-)

Dan Donaldson

>

Re: WC Weekend Accomplishments.....

#12

Made a Lot of Jatoba Chips

Ed Beck

>I've been working on a new kitchen table since just after Christmas. This weekend I beveled the table top. It's 3/4" thick, and my bevel runs from 3/8" on the side to 1 1/2" along the top. This is a very comfortable bevel, it makes for a nice forearm rest (or it will, eventually).

.

That�s my new Lie-Nielsen Low Angle Adjustable Mouth Block Plane sitting in a pile of the chips that it made. I must say that Lie-Nielsen now joins MSR in the list of places that I look first when I need something.


Working with this tool was a delight. Now I�m sure that those of you with mad woodworkn� skilz could outperform me while using a broken beer bottle, but the difference between using this plane and other planes is just amazing, making it easier for me to get this job done. It takes and holds a nice edge, it�s comfortable to hold, and allows for very fine adjustments.

And it makes nice chips too!


As to the MSR reference, if I need outdoor gear, MSR is the first place that I look. They make outstanding, well-designed, reliable gear that is going to work when you need it. If any of you are into backcountry backpacking, or are getting into it, please take a look at MSR when you need some new gear, you won�t be disappointed.

Re: WC Weekend Accomplishments.....

#13

Let me guess...

Hank Knight

>You smuggled them by customs in your suitcase. ;~)

Re: WC Weekend Accomplishments.....

#14

Re: Let me guess...

Clay Foster

>Yeah, but the hard part was getting them in the overhead compartment on the plane. I was afraid the baggage handlers might damage them.

Re: WC Weekend Accomplishments.....

#15

Ellis Walentine

It wasn't your day, Mike

Ellis Walentine

>I hope the palm injury wasn't too serious. There are a lot of tendons in the palm of your hand. DAMHIKT

What kind of flex shaft tool are you using, BTW? My Lee Valley catalog finally arrived and I loved the cover photo. Nice work.

Ellis

Re: WC Weekend Accomplishments.....

#16

Ellis Walentine

Sawmill time

Ellis Walentine

>My weekend highlight was a trip to the sawmill to preside over the sawing of my big cherry log. The lumber was a bit of a disappointment, with lots of rot and defect in it, but the sound parts are beautiful. I sawed up two quarters of the log for turning blanks. Can't wait to turn a few bowls and pots.

Ellis


img

Re: WC Weekend Accomplishments.....

#17

Re: Sawmill time

Jay St. Peter - Southern, MD

>Wow, that's a nice size log. I dropped a few cherry logs off at the Sawmill two weekends ago and picked them up this weekend. I had 6 or 7 logs that were not real big. But, they managed 146 BF from them.

The sawmill was significantly different than the one you used. It uses a fourty-some inch circular blade with a carriage on some train rails. It's run by a local menonite guy and is an OSHA nightmare. It's driven by an old GM diesel and leather belts tensioned with worn wood "tensioners". It's definitely some of the rougher cut lumber I've seen. I dropped it off at a kiln this weekend. It was on the ground for a while and I didn't want any insects eating my wood piles, so it's getting kiln dried. It's hard to judge how nice or usable it's going to be until I can get some sort of plane blade on it.

It's pretty cool to have both a mill and kiln within 5 minutes of my house. I wich I had some better sources of logs.

Jay

Re: WC Weekend Accomplishments.....

#18

Re: Sawmill time

Stephen Kirk in Quakertown, PA

>Ellis, where is the mill that you go to?

Re: WC Weekend Accomplishments.....

#19

source of logs

JohnKJordan in East TN

>>I wich I had some better sources of logs.

I've got the opposite problem - I have a sawmill behind my barn and WAY too many logs to saw. I found that once the word gets out, log offers come from everywhere.

When I needed logs, I stopped when I encountered county workers on the sides of roads. The first time I did that resulted in several truckloads of logs.

I stopped and talked to people cutting trees. Often, the landowner just wants the tree down and out of there and it helps the tree service to have someone haul the logs off. I made several contacts with tree cutters who called me later when they found good logs.

I stopped once where a man was cutting a HUGE walnut tree into firewood. Turned out he just wanted to get it out of the way and gave me all of it in exchange for a future bowl.

Driving around after a big rain or storm will sometimes identify trees down. Many people are extremely happy to get at least some of the mess (the heavy part!) removed. I got a nice cherry with about 40' of straight trunk this way from just down the road.

I've cut oak logs into chunks and traded them to people cutting figured maple and clear cherry into firewood.

When I visit farmers and other landowners, I would mention I have a sawmill. Some of these called me later when they or someone they knew had a nice tree down.

I've gotten several good burls from timber and sawmill people since they are typically discarded. One local sawmill saves these and gives them to woodturners that ask.

Note that you always have to be aware of the possiblity of metal in trees that come from yards and fencerows. Normally this metal is in the lower 5-6', but I did find one yard tree that had hundreds of nails that made the hollow center look like and inverted porcupine. (A couple of generations of kids had been pounding nails into that tree to make ladders to treehouses!)

JKJ

Re: WC Weekend Accomplishments.....

#20

Ellis Walentine

Bucks County Hardwoods

Ellis Walentine

>John Kirlew is a great guy and has three mills, including a big chainsaw mill. This one is a 36" bandsaw mill with a 5" blade. It cuts as smooth as any mill I've ever seen. He routinely cuts fancy stuff for Mira Nakashima.

John is down off 611, where Pt. Pleasant Pike meets Old Bethlehem Rd. He should be in Woodfinder pretty soon.

Ellis