Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Need On-Site Sawing

Posts

Need On-Site Sawing

#1

Need On-Site Sawing

Howard

>I likely will have a red oak 30" wide by 30' straight stem that I want to have cut to lumber. I live in Rockland County, NY and someone a long time ago told me about a guy in Westchester County, NY(Just across the Hudson River) that had a portable band mill. Anyone able to tell me again who this person is or could you suggest someone else who is near me. Thanks

Re: Need On-Site Sawing

#2

Re: Need On-Site Sawing *LINK*

Bob Lang

>Woodmizer is a manufacturer of the portable mills, and if you contact them, they will put you in touch with someone near you.

Bob Lang


woodmizer

Re: Need On-Site Sawing

#3

Re: Need On-Site Sawing

Mark Mandell - Gone Round In Jersey

>Howard,

Google Woodmizer and Timber King then go to their web sites where you should find a locater section for referrals to their owners in your area who list themselves as available. I know one guy down near me in West NJ but he wouldn't go that far, especially for a small job like your have.

Re: Need On-Site Sawing

#4

Contacts

Mark Mandell - Gone Round In Jersey

>I just went to bopth sites and could not find the referral sections so you may have to contact the companies or their regional agents directly for the info.

Re: Need On-Site Sawing

#5

Re: Contacts

Rob Stokes in North Vancouver

>Call 'em (the saw manufacturers). They'll either give you the contacts over the phone or hey'll contact the sawyer and have them call you.

Rob

Re: Need On-Site Sawing

#6

Re: Need On-Site Sawing

Howard

>thanks-I contacted Woodmizer and called one guy, but he has not returned the call.

Re: Need On-Site Sawing

#7

Re: Need On-Site Sawing

Mark Mandell - Gone Round In Jersey

>Wait a few days then call woodmizer for another reference and mention the NCB. These mfgr's want their referral service to be current and will contact the guy in case he sold his machine.

mm