Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Reading Your Boards-Mark of Zoro?

Posts

Reading Your Boards-Mark of Zoro?

#1

Reading Your Boards-Mark of Zoro?

Bill Tindall, E.TN

>What you see is a mark on the end of a piece of 8/4 walnut. It is not the �Mark of Zorro�. Instead it is an �N� indicating that this piece of lumber was graded by a National Hardwood Lumber Association (NHLA) lumber inspector.

NHLA inspectors can be hired to grade lumber when a private grader is unavailable or more commonly when the grade of a lot of lumber is in dispute. If a buyer and seller can�t agree on the grade a NHLA inspector can be hired to come in a grade the lumber. These inspectors are the final word on lumber grade.

These marks are becoming rare. Some years ago most hardwood lumber produced in the US was consumed by US furniture factories, often located near where the lumber was harvested. This lumber was/is traded according to the rules established by NHLA. A lot of domestically produced lumber is now exported. The grading rules for export lumber are often more stringent than NHLA rules, rendering NHLA less relevant than it once was.

When we sold lumber we sometimes got packs of lumber put up for export instead of packs for domestic consumption. I loved to get export packs. The quality within a grade was always better and the lumber just looked better, making it easier to sell. Now days all the lumber produced by the big mills looks like export packs.

Note that this piece of walnut looks black and �sooty�. That is because it has been steamed (see article in Articles Section of WoodCentral on steaming). When walnut comes from the steamer it looks like it has been covered with black soot. This soot is some product of the steam acting on the wood pigments. It planes off revealing walnut color beneath.


img