Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E. Peacock

>7 Jan 2008

Happy New Year and Welcome to 2008!!!!!

Woke up this morning to a spring like day with temps in the upper 60's and yes, this seems to be very odd for January temps. But as we always say around here: Just wait 5 minutes and the weather will change.

No woodworking for me this past weekend. Just a lot of work at the day job as well as spending a good bit of time learning some new music that we are now doing at our church. I'm trying to advance in my bass playing skills, but I guess as a musician, we are never really satisfied with our playing skills.

Watched a couple of movies with the kids, took one of my old computers and reworked it with part from another machine and built them a new machine with a better wireless network setup. They are happy and that makes me happy too.

I am planning on being in the shop some today since the weather is nice and I can finish spraying the lacquer on a couple of pieces I've been working on.

The Walnut Table Project is still in the works and I will start back on that project in a week or so.

That's it for me.....so what did YOU do this weekend???

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

George@Colonel's Workshop

>Good Morning Dennis and a Happy Monday,

I finally got myself disciplines enough to sit and draw up plans for our new double bureau. With luck, I will have it all finished today so I can go buy some wood. On Saturday, before the design work, I made two zero clearance inserts for the table saw, and kerfed in my own splitter. I tested one of the inserts and it seems to work okay. Had a few kids and grandkids for the family dinner party last night, and enjoyed watching the kids test wooden toys I had made. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Jay St. Peter - Southern, MD

>I thought I might complete my workbench this weekend. I cut the two pieces for the vice faces for my end vice. I'm using a LV large face vice as my end vice. I had used the smaller face vice as my face vice and had perfect results using their template. So, with the confidence of the first vice, I machined my pieces and used the template to make all the holes and such. Well, the template that came with the large vice was bad. I can see that LV fixed the problem since my small vice is newer. The templates were part of the manual in the large vice, but were a separate piece of paper with the small vice. The manual is common, so the older manual had both templates in it. I can clearly see, now in hindsite, that the small vice template is wrong in there as well. I suspect they had scaling problems in the manual printing and removed the templates to separate sheets. LV is mailing me a new template. But, whatever the case, I now have two large hunks of 8/4 maple with holes precicely drilled in the wrong place. It took the wind out of my sails and I left the shop for the weekend frustrated. Since the last of the 8/4 maple is too small, I either need another piece or need to decide to make the jaws a few inches smaller as I can't really see how to save the parts I have. Neither option appeals to me much. So much for imminent completion of my two year in the making bench.

Jay

Re: WC Weekend Accomplishments.....

#4

JL

Re: Baking...

JL

>several King cakes for Epiphany. Cinnamon sugar filling and cream cheese filling. Plain vanilla frosting with gold, purple and green sugar sprinkles. It was amazing how quickly they disappeared.

I hope our priest was joking when he said whoever got the beans got to preach next Sunday :) - it wasn't me, thank goodness.

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

David Yoho

>Jay, how many holes and what size? I know maple is easy to come by but maybe you don't need to buy more if you repair those holes. Have you thought about plugging them with some birch dowel stock? Even if the holes are an odd size, you could re-drill them with a forstner bit to the next closest "normal" size a dowel would fit, cut some dowel pieces the right length, pop them in, and drill the correct holes from the new template.

Just a thought. After all, these are just vice jaws!

David

Re: WC Weekend Accomplishments.....

#6

Yes

George@Colonel's Workshop

>I agree David.

I could envision plugging the holes up to almost flush, then using a plug cutter in face grain maple to complete the fill, level with a cabinet scraper. It is aggrevating though. Getting within a hair of completion and having that happen. Its driven me to the refrigerator once or twice. :<)

George

Re: WC Weekend Accomplishments.....

#7

Re: Yes - Yes

David Yoho

>I considered the idea of adding a face grain plug but not knowing the hole size or if Jay had plug cutters, I left that to his judgment. Depending on the size, that's probably what I'd have done but for vice jaw pads I don't see anything wrong with seeing the exposed end grain of the dowel either.

This past weekend I was ripping two pieces of inch and a half thick tiger maple - destined for ogee bracket feet. Somehow I transposed the incorrect height dimension to my plan - it was off by 1/2". Once I realized this, out came the glue and clamps. I stuck the offcuts back on, waited until dry, and ripped to the correct size. The glue line is not noticeable and it was a better option than cutting new blanks.

The great thing about wood is often times there are ways to fix mistakes that work and if anyone has never done this, then they're not woodworkers but tool collectors ;-)

David

Re: WC Weekend Accomplishments.....

#8

Re: Yes - Yes

Don in Northern Arizona

>David and Jay,

I was making the doors for my kitchen cabinets in Tucson a number of years ago and had selected two matching ash boards for the panels of the doors over the stove which could be seen from the dining room. I had two boards I had selected with beautiful heartwood cathedrals on them. I was in a hurry to finish things and munched one long grain edge of one of the boards while raising the panels on my crude radial arm saw jig. I ripped off about 2 inches of the panel and managed to find a reasonable match in my scrap pile. I jointed the two pieces carefully and glued them up and ran them through my panel raiser, finished the pieces, and assembled the door. I defy anyone to find the glue joint. It is no great testament to my hobbyist skills that I find myself doing stuff like this a lot, but I feel a great deal of satisfaction pulling off a saves.

Don

Re: WC Weekend Accomplishments.....

#9

Re: Yes - Yes

Jay St. Peter - SoMD

>Yeah, I went down and took stock of the problem for a little bit tonight. I might be able to save them by patching. The holes are 1" and 1-1/4", so not sure where I'll get plugs that big. I'll have to look at the local hardware joints to see what I can get. I also had a thought of taking them to the mortiser and making them square so I can drive a piece in to patch them. One of the pieces has a 2-5/16" x 1/2" deep recess around the 2 1" holes, so it's a little harder to save that one, but doable with some effort. I'm thinking I can save one of the parts by just drilling out the new hole locations as they will partly overlap the old ones. It'll look ugly, but probably work. I'll have to wait for the full size template to show up to know for sure how bad it'll be. Most likely it'll be hidden from view by the vice itself and cause no real usability issues.

I used some B grade lumber for the legs and the top tore out pretty bad during flattening, so there aint much chance this bench is going to reside in the living room anyway ;) Sheesh, the 8/4 maple piece I had was so nice and clear I was feeling bad about using it for vice faces to start with. Now that I've gone and butchered it, should be perfect for this project.

Thanks,

Jay

Re: WC Weekend Accomplishments.....

#10

Re: Butcher block vice face might work nicely

Jay St. Peter - SoMD

>

Re: WC Weekend Accomplishments.....

#11

I had a feeling...

David Yoho

>those holes were large. Couple of ideas -

One of the pieces has a 2-5/16" x 1/2" deep recess around the 2 1" holes

Sounds like a good time for a face patch. Use your router with a straight bit to create a uniform shape around those holes (same depth or a little more), cut a piece of maple almost the same thickness in that shape, and glue it in. Shave or sand smooth and it's done.

For the larger holes, I think I'd try your idea with squaring them up with the mortiser and inserting a square piece in the once round holes.

However, if you want to try a round patch, try this -

Chuck a 1 1/4" forstner bit in the drill press. Get a piece of maple (whatever thickness) and just bring the bit down onto the surface enough to cut the outline of the radius (don't go in much at all). Then take this over to the bandsaw. Using a narrow blade, carefully cut around the radius made by the bit. If you're successful at this, the plug should fit into the hole reasonably well enough to work.

David

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

John Veerkamp

>In the 70's here this weekend also. Got a start on next winters fire wood. Had help from a couple of my grandsons. It was a great time in the woods with a 17 and 15 year old boys. They are a big help to the "old man".

John