Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Porter Cable 4210 dovetail jig

Posts

Porter Cable 4210 dovetail jig

#1

Porter Cable 4210 dovetail jig

Dan Mitchell

>I'm considering the Porter Cable 4210 dovetail jig, currently on sale at the local Rockler (supposedly a "manager's special") for $99.99, with a $5 coupon I have that's about $104 w/tax, which seems like a reasonable price. It's $109.95 w/free shipping on the PC site. I've never used a dovetail jig & am wondering if this is a good one. I would us it with my Hitachi M12V plunger router. Features as described by PC are:

Cuts half-blind dovetails, rabbeted half-blind dovetails, and dovetail dadoes. Additional templates are available to create through dovetails, box joints, and miniature dovetails. Includes:

* 12" Dovetail Jig - 4210

* Half-Blind/Dado Combo Template - 4211

* 1/2" Shank Carbide-Tipped Dovetail Bit - 43776PC

* Template Guide - 42040

* Lock Nut - 42237

* Operating Manual

Anyone have an impression of whether or not this is a decent jig for the $$$?

TIA

Dan

Re: Porter Cable 4210 dovetail jig

#2

Re: Porter Cable 4210 dovetail jig

Bri in Mtl

>I have the deluxe 4212. Quite happy with it. Found that it works best having 2 dedicated routers for it so you don't have to make adjustments.

Another thing is that the RE-learning curve isn't too long after not using it for a few months. ;)

As I get older this is becoming more of a factor when buying a tool. LOL

Re: Porter Cable 4210 dovetail jig

#3

JL

Re: Porter Cable 4210 dovetail jig

JL

>I bought one with a PC 890 router a while back (Manager's special also - router and jig for $169). I've used it for a few drawers (over 20). It has worked great.

Re: Porter Cable 4210 dovetail jig

#4

Re: Porter Cable 4210 dovetail jig

Ray Thompson

>I have this same jig. Do not use very often; but it does the job very well.

Re: Porter Cable 4210 dovetail jig

#5

Re: Porter Cable 4210 dovetail jig

David Yoho

>Dan, I have the much old model #4112 PC 12" jig. They made some improvements on the model you're looking at but it's basically the same jig. I used mine until recently and probably won't now with the recent purchase of a Leigh 24" Super Jig.

I think you'll get good use from it and it's pretty easy to use. I don't know about the newer versions but I always thought mine was a bit fussy to calibrate just right each time I used it. I can say it was great at making half blind rabbetted drawer dovetails the one time I needed that feature.

David

Re: Porter Cable 4210 dovetail jig

#6

Re: Porter Cable 4210 dovetail jig

George@Colonel's Workshop

>Good Aftrernoon Dan,

I bought the #4212 vewrsion, as I do lots of box joints as well as dovetails. I am completely satisfied with it. Set ups don't take too long, and a little time spent fiddling up-front yields very nice results. Instructions are pretty well presented. An extra router is nice to have when you cut pins and tails, but is not completely necessary. I bought a second PC 690 for the convenience.

George

Re: Porter Cable 4210 dovetail jig

#7

Ditto on 4112 - and a good review *LINK*

Tim Greif - West of Chicago

>I also have the 4112 (actually the Hartville version of same jig) and agree with David - it's basically the same as the one you're looking at, but the new ones have been improved.

Once complaint I had when using it initially is that I could not get the front and side pieces of the drawer to be perfectly aligned. The side piece would fit fine, but be slightly offset vertically from the front piece. I always assumed this was due to a defect with the jig or some adjustment in the jig was off. After reading the following review, I discovered that if the bit is not perfectly centered in the router guide bushing, the offset I experienced would indeed occur. Paying greater attention to the router baseplate adjustment to get the bit centered in the guide bushing solved the problem and eliminated all offset.

What I thought was a jig adjustment problem was in fact a router setup problem. I think you'll like the jig, but be sure to read the following review a couple times, and pay attention to the part about bit alignment with the guide bushing.


4112 Review

Re: Porter Cable 4210 dovetail jig

#8

Re: Porter Cable 4210 dovetail jig - fussy setup

Carol - now in NC Nebraska

>FWIW. I went into some detail on setting this jig in my book, Router Joinery Workshop.

It would be interesting to see the new directions for the 4212. Same jig. A few refinements. Once dialed in, easy for the next setup, especially with the setup jigs from my book.

Shameless, but perhaps helpful, plug.

Re: Porter Cable 4210 dovetail jig

#9

bit not perfectly centered

David Yoho

>Yeah, that'll do it. One of the inovations with the new Leigh Super Jig is their "E Bush" guide bushing. It's adjustable and a simple twist of the E Bush changes its active diameter, which in turn changes the fit of finger joints and half-blind dovetails.

David

Re: Porter Cable 4210 dovetail jig

#10

Re: Porter Cable 4210 dovetail jig

Dan Mitchell

>Thanks for all the helpful input on this. Seems like a reasonably good tool at a decent price, though I'm not entirely sure I'd use it all that much at this point. Probably better to hold off a bit.

Thanks again,

Dan