Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Look up in the sky....

Posts

Look up in the sky....

#1

Look up in the sky....

Lee Schierer - McKean, PA

>Here is a wooden FA-18 that I made for my grandsons for Christmas. It is made from maple and is unfinished. My oldest grandson is a big fan of the Blue Angels and I thought he might like an FA-18 of his own. He played with it most of the 6 hour trip home this past weekend and hasn't stopped flying it around yet.


I made it from a silhouette drawing I found on the internet and enlarged with a copier. Figuring out how to make it sturdy and assemble easily was a bit challenging. So far it has passed the kid test.

Thanks for viewing

Lee

Re: Look up in the sky....

#2

Re: Look up in the sky....

Philip F Duffy

>FLY NAVY! He has the right idea,keep him pointed in the right direction! Philip- 31 years of wearing the Wings of Gold

Re: Look up in the sky....

#3

Re: Look up in the sky....

Jim Shaver Oakville, Ontario

>Hey Lee,

That is awesome, what a great gift and even better to sit back and watch him enjoy what his grandfather can do.......one of the best Christmas gifts I have seen.

Take care,

Jim

Happy New Year!

Re: Look up in the sky....

#4

The body shape . . .

steve mackay

>is a wonderfull job. I make this kind of stuff for my $ and can tell you spent a long time getting the curves and shape down cold ! You really nailed it. From picture to blank is no easy job !

Re: Look up in the sky....

#5

Re: Look up in the sky....

George@Colonel's Workshop

>Nice Job, Lee

You really did nail that body shape. What did you use to work the curves?

George

Re: Look up in the sky....

#6

Re: Look up in the sky....

Lee Schierer - McKean, PA

>The fuselage is a piece of 3/4" maple. I cut the outline with my bandsaw and then rounded the corners with a 3/8 radius round over bit on my router table. The same bit rounded over the outside of the engine nacelles. I cut the slot through the body with my Bosch jig saw and smoothed it out with a file and chisel. The final point on the nose was done by hand on a drum sander in my drill press. I also used a round over bit on the leading edges of the wings, elevators and tails.

Lee