Re: Shipping Furniture question
ScottS
>There are several options to investigate; I'm not sure which would be the most cost-effective. Obviously, you could check with any of the standard delivery services: UPS, FedEx Ground, DHL, etc. If your son is at all handy, perhaps you could do all of the milling and finishing, but require him to do the final assembly? Ideally, he'd just have to spread some Titebond on a few tenons or dowels and apply some clamps.
If shipping the piece "flat" isn't an option, you might also look into a depot-to-depot shipping service like Forward Air or Greyhound Package Xpress. You'd drop the piece off at their depot in Richmond and your son would pick it up at the depot in Nashville a couple of days later. Greyhound says it would cost $86 to ship 100 lbs. from Richmond to Nashville if you did it on a space-available basis. Looks like they have five buses a day, so you probably wouldn't have to wait very long. Forward Air might be cheaper. I had a friend who used them to ship a motorcycle cross-country and I want to say it only cost him about $300.
If the speed of delivery isn't critical, you might also contact moving companies in your area. Often, they'll have a partially-loaded truck going from one big city to another and they're happy to throw a few extra boxes in the truck to make some extra money. I haven't actually used a mover, but prices seemed to be all over the board the last time I looked into it. Some guys were dirt cheap ($20-40), others were ridiculously over-priced ($300-500) so it pays to call around.