Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Wottaboutdat! Drill Doctor Actually Works

Posts

Wottaboutdat! Drill Doctor Actually Works

#1

Wottaboutdat! Drill Doctor Actually Works

George@Colonel's Workshop

>Good Evening Friends,

I went to the Orange Borg yesterday with a couple gift cards, intending to replace/augment some bench stocks. I had a cart filled with task light bulbs, small cans of various poly and stain, and appropriate solvents. Wandering around in the tool crib is always a disappointment because I don't NEED anything anymore. However, I glanced down and spied a model 350X Drill Doctor. So, I bought it, watched the enclosed CD, and retrieved my box of old spare twist drills. The darn thing really works! When I got finished with the box of spares, I started on a couple sets I keep handy at the drill press and in the Neanderthal Shrine room. It was a very nice experience. All my left over scrap wood contains nice crisp little multi-diameter holes. I've run out of wood, and hope somebody can send me a few hundred bf each of cherry and poplar. :<)

George

Re: Wottaboutdat! Drill Doctor Actually Works

#2

I've had it for several years.

Robert R Clough - Thorncraft

>Yes, Drill Doctor does actually work, and as well as claimed. Not only does the tool work on standard drill bits, but it also works well on drill bits for concrete. By the way, don't try to sharpen bits less than 3/16. Not worth it.

Re: Wottaboutdat! Drill Doctor Actually Works

#3

Dale Lenz

Re: Got one for Christmas

Dale Lenz

>Watch the CD and gleamed over the instruction booklet. Have not actually tried it yet. My instructions says it sharpens drill bits 3/32" to 1/2" I believe. Are you saying: the Drill Doctor does not work well on 3/16" to 3/32" bits? I use a lot of 1/8" bit and smaller so the DD might not be as handy as I had hoped for.

Happy New Years

Re: Wottaboutdat! Drill Doctor Actually Works

#4

My review of the Drill Doctor with photos. *LINK*

Garrett in Victoria

>In more detail, it confirms the Colonel's comments.

It will do 1/8" bits with a little more care than for the larger diameters.

Cheers, Garrett


DD 750X Review

Re: Wottaboutdat! Drill Doctor Actually Works

#5

Re: Got one for Christmas

Robert R Clough - Thorncraft

>No Dale, my point is . . . Why bother? I did my entire set - once. Since then I purchase anything smaller than 3/16 as being easier to do. I suppose I'm just lazy.

Re: Wottaboutdat! Drill Doctor Actually Works

#6

I'm not meant to have one,

Mike Schwing from Md.

>apparently. This is the one tool that I put on my Christmas and birthday list, for several years running, yet no one will buy it for me. Oh well.

Re: Wottaboutdat! Drill Doctor Actually Works

#7

Re: Wottaboutdat! Drill Doctor Actually Works

Bill Tindall, E.TN

>Question

Thanks for the post as I have been contemplating a purchase. Is there any difference among the models in their ability to sharpen up to 1/2" standard bits? I understand that as one spends more the capability of the machine to do larger sizes and more complex grinds goes up, but does the basic quality of the machine go up with price.

Is there a reason to get he more expensive model to sharpen a typical 3/8" drill?

Re: Wottaboutdat! Drill Doctor Actually Works

#8

never give up

JohnKJordan in East TN

>>on my Christmas and birthday list, for

>several years running, yet no one will buy it for me.

Hey, for the past 15 years when my wife asked what I want for Christmas I tell her the same thing: an RC model tank kit. Another 5 or 10 years of this and I'm afraid my patience will wear thin.

I thought this was the year but it wasn't to be - maybe next year, yes, I can't wait till next year!

JKJ

Re: Wottaboutdat! Drill Doctor Actually Works

#9

Re: Wottaboutdat! - By the Colonel

Ray Carson, Lawrenceville, NJ

>George,

Glad to see you CAN teach an ole' dog new tricks......I mean teach him to buy new tools.

I tried to make a joke there George but I have no sense humor. Actually, I have a sense of humor, I just can't make humor.

Thanks for the post on the Drill Doctor. Makes me want to run out and buy one. :-)

Dull Ray in Lawrenceville.

:-)

Re: Wottaboutdat! Drill Doctor Actually Works

#10

Re: Wottaboutdat! Drill Doctor Actually Works

Mark in B'ham

>I was surprised too, Colonel, when I borrowed it from my Dad a couple of months ago I thought I would try it out. He had never used it. I let it set on my bench for almost two months. I saw it when I was getting packed up for the trip to my parent's for Christmas and thought "I better take that back." I only had about an hour before I had to leave, but I took it out and tried it and only read the instructions. I never saw the video. It worked like a charm and I went through one whole set of twist bits before I had to leave. I gave it back to my Dad, but I might get one that is closer than Kentucky to use.

Re: Wottaboutdat! Drill Doctor Actually Works

#11

Re: Wottaboutdat! Drill Doctor Actually Works

Moses Yoder in White Pigeon, MI

>I'm glad to see it works; I went to Lowe's with a couple gift certificates and ended up with the Drill Doctor also.

Re: Wottaboutdat! Drill Doctor Actually Works

#12

Bill T...

Garrett in Victoria

>The more expensive versions will sharpen split point bits as well as handle larger diameters. For regular point bits, the less expensive models will do the same job.

Cheers, Garrett

Re: Wottaboutdat! Drill Doctor Actually Works

#13

Fagedaboudit!

Mark Mandell - Gone Round In Jersey

>Never realized what a nice luxury it is to have sharp bits until I got my DD-500.

mm

Re: Wottaboutdat! Drill Doctor Actually Works

#14

Hey! I've got a DD-214!

George@Colonel's Workshop

>

Re: Wottaboutdat! Drill Doctor Actually Works

#15

But No

Mark Mandell - Gone Round In Jersey

>Post-Partum depression, I hope.

Re: Wottaboutdat! Drill Doctor Actually Works

#16

Hey, I got one of them too ;-)

Dan Donaldson

>

Re: Wottaboutdat! Drill Doctor Actually Works

#17

Dale Lenz

Re: Ya...But can you find it, in 2min or less? :">

Dale Lenz

>

Re: Wottaboutdat! Drill Doctor Actually Works

#18

Yup ;-)

Dan Donaldson

>Know exactly where it is ;-)

Re: Wottaboutdat! Drill Doctor Actually Works

#19

Dale Lenz

Re: ;-)

Dale Lenz

>