Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Wood Dye Question

Posts

Wood Dye Question

#1

Wood Dye Question

Rick Snyder

>Hello,

My Son bought a small side table from an unfinished furniture store on the Web. The piece is made from Alder wood. The piece is milled very nicely and constructed very well. He would like the piece to be black. I know of a couple brands of wood dye (Mixol & Transtint). Anyone have experience with this two products or other similar types. As I don't have any spray equip. yet, painting ( brush or roller) is not an option at this point. Any help on using wood dyes would be appreciated ie. brands, pros, cons, drying times, water base or oil base, techniques etc.

Thank You very much,

Rick

Re: Wood Dye Question

#2

Re: Wood Dye Question

Clint Searl, at the base of Haycock Mtn

>A true black pigmented stain can be made by mixing Ronan brand black pigment paste with naptha or a drying oi or a film finish.

Clint

Re: Wood Dye Question

#3

JL

Re: Wood Dye Question

JL

>I've used TransTint dyes concentrates upon occasion. I typically take a small screwtop glass container (small peanut butter jars work good for me) and fill it about 1/2 full with 90% or greater isopropyl alcohol. Others have used denatured alcohol, but I find that it evaporates too quickly for an even coat when wiping it on - though you can use a retarder to slow down the evaporation rate.

I then add the dye to the container by counting how many drops I put in (you can also do it by teaspoons if you want). I dip a piece of test wood in, wipe it off and let it dry. For a nice dark stain, you have to use a fair number of drops. I then wipe it on the piece and let it sit for a while (a couple of minutes) and then rub the piece gently with a soft cloth. YMMV - but this works for me. Try it on test pieces of wood until you are comfortable.