Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

DVD recorder help?

Posts

DVD recorder help?

#1

DVD recorder help?

ernie miller

>I got a magnavox DVD recorder for christmas to convert family videos to DVD the problemis the manual written it electronic GEEK 5.3 and I barely understand english and can't even wright in english corectly.is thare any easy guid to making DVD on these machines? somthing a woodwoeker might understand?

Thanks for any help. Ernie

Re: DVD recorder help?

#2

Ellis Walentine

Not much help here, but...

Ellis Walentine

>... what kind of videos are you trying to convert? If it is home videos from your camcorder, are you able to plug the Mini-DVs into the Magnavox? If not, you might be better off converting them on your computer itself, using your camera as the drive to store the files on your hard drive. Most camcorders have DVD creation software bundled with them.

I hope there will be more helpful replies, Ernie.

Ellis

Re: DVD recorder help?

#3

That's the wrong device for that job

HC Sakman

>Hi Ernie,

I think a computer with a video card that has the necessary input format(s) (RCA, S-Video and/or Firewire, depending on what the source's output format is...) AND the right software, it'd be much easier and faster to accomplish what you want to do.

Chico...

PS:DVD recorder w/o a hard-drive is not the best way to go. A little "primitive" in this day & age.

Re: DVD recorder help?

#4

Re: DVD recorder help?

JohnKJordan in East TN

>Is this a standalone recorder? If it's anything like the the Panasonic and Pioneer models I have and have had, making simple DVD's is incredibly easy once you set the right mode. It was so simple and quick to record that even when I needed to produce an authored DVD with custom menus, etc, I would often dump the video source directly to the recorder, rip it from that DVD with software, then author and burn a new DVD.

Recording from video tape (or any video source) to DVD is simply a matter of making the audio and video connections, setting the right mode on the recorder, pushing Play on the VCR and Record on the recorder. The recorder does the encoding according to the mode you've set - the recorders I'm familiar with allow several different quality modes, the tradeoff being the recording time. After recording, you can add optional text titles, etc, and you have to Finalize the disk so it can be used in other players.

If there are specific things in the manual you don't understand, maybe you can describe them here for interpretation. If you started reading the manual and gave up, try again and read all the way through. You should be able to ask for advice at the store where you got the recorder. If you bought it on-line, any 15 year old kid should be able to help!

JKJ

Re: DVD recorder help?

#5

Re: DVD recorder help?

Tom

>What model number? The manual is probably online.

Re: DVD recorder help?

#6

Re: DVD recorder help?

Ron Berlier

>I can appreciate you're problem. I got one two years ago and had to spend a couple of hours going over everything.

A suggestion is, if you got it from a local store, go to the store and have them "teach" you how to use it. HTH

Re: DVD recorder help?

#7

Re: DVD recorder help?

ernie miller

>should have been a man to start with nephew came ove and helped me didn't read the book much and wrote me a cheat sheet. only cost an evening of fun. Thanks guys