Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Rigid planer

Posts

Rigid planer

#1

Rigid planer

david barr

>Has anyone used the Rigid planer (12 inch model)? Our local Home Depot has one for sale and I was considering it for my shop.

thanks!

Re: Rigid planer

#2

Re: Ridgid planer

Glenn Madsen near San Francisco

>I bought one about 6 years or so back, and have used it pretty hard, for a hobby guy. It works well.

I broke mine, though, when I did something stupid, and blew out some cogged wheels. The parts desk had them, and shipping on 6 of them was more than the cost of materials. But there are 4 more now in my tool box, in case I do the same thing stupid again.

The blades are not supposed to be resharpened, but I have rehoned mine with 800 grit wet/dry paper, wrapped around a maple block, and the results are pretty good. Soft maple, walnut, cherry, tanoak, red oak, poplar all go through pretty well. The machine gets a lot of use when I'm in cabinet mode.

The model offered now has two speeds. I don't know that I would need that. It may have three blades, too, but then again, I don't know that that would make a difference for me. It's a rugged machine, well made, and mine's paid for. There's a good chance you'd get your money's worth out of a new one, too.

Re: Rigid planer

#3

Re: Rigid planer

JohnKJordan in East TN

>I have a 13" planer so it may be a different model - I didn't know they had a 12" model. I've had this one for 5+ years and it's worked very well. I like the portability since I don't have room at the moment give it its own space.

JKJ

Re: Rigid planer

#4

Re: Rigid planer

Jay St. Peter - SoMD

>I think you'll find most of the owners here own the old version as the new version is ... well ... new. As a hobby WW'er, I'm happy with the old version. I have had to replace the sheet metal bed in it as it had dented in where the infeed and outfeed rollers push down creating extra snipe and causing feed problems. Since then, no problem. It was around a $20 part. I have no idea if the new version uses the same mechanism or not.

Jay