Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

A Building Code question for you folks

Posts

A Building Code question for you folks

#1

A Building Code question for you folks

Glenn Madsen near San Francisco

>I'm slowly finishing off the kitchen cabinets for my daughter-in-law that I started a year ago. Today is a pair of them for the microwave oven, and over the refrigerator.

My wife brought up an issue, as I'm getting ready to go put the finishing touches on them. She says she remembers a change in code regarding where the electrical plug needs to be when the microwave is enclosed in a cabinet. I have an existing plug behind the unit I was planning to use. Do I need to move it somewhere else? And why?

Electricity and I are on speaking terms, but we're not the best of friends. And this house is 60 years of age, owned by friends and rented to my kids, so ...

Re: A Building Code question for you folks

#2

Re: A Building Code question for you folks

Eddie Pacheco; San Jose, Ca.

>Our GE microwave is an under cabinet type installed in '03. The outlet for it is in the wall of the cabinet above. The inspectors approved the installation.

Where abouts near San Fran. are you?

Re: A Building Code question for you folks

#3

Re: A Building Code question for you folks

Glenn Madsen near San Francisco

>I'm on the border between Martinez and Pleasant Hill, CA. This house is in Pleasant Hill proper.

The electrical box could be moved, if needed, but my inclination would be not to mess with it if I didn't have to. This house has all sorts of mysteries, mostly caused by not having a handy homeowner over the last 40 years. Rewiring could open a whole can of worms, completely unwelcome in a remotely owned rental, where the owner resides 1000 miles away, and isn't wealthy, cash wise. She doesn't want to sell us the place yet, either...

I would be more than willing to put in a switched power limiting switch, however. If that fits code. Off to the local hardware store this afternoon. Peter will know, if he's in.

Thanks for the info so far!

Re: A Building Code question for you folks

#4

Re: A Building Code - Hmm?

Ray Carson, Lawrenceville, NJ

>Glenn,

I believe you need an answer from someone that is familiar with the NEC (National Electrical Code).

I am very familiar with the IBC 2006 and IBC 2006 Residential Code and I couldn't find a thing in those code books. I'm currently studying to get my Building Subcode License in New Jersey now.

If the outlet had to be moved for any reason, I believe the reasoning would be, that in the event of a fire or other problem, the plug would be in plain view and accesible for disconnect.

I would also check with your local town code department or freindly neighborhood electrician.

"East Coast" Ray

Re: A Building Code question for you folks

#5

Re: A Building Code - Hmm?

Glenn Madsen near San Francisco

>Thanks, Ray.

I did the next best thing. I talked to the owner of the local hardware supply place here. His family has been in the business for 3 generations, and his teenage daughter helped me find some stuff I needed, so that makes 4 generations now. Peter had never heard of such a provision.

So I'm calling this one good. Now I've talked to 'a cross section of nationwide experts'!

Thanks for the answers!

Re: A Building Code question for you folks

#6

If I remember correctly...

John in New Mexico

>Which I may not....

The code doesn't forbid the use of an outlet inside the appliance cabinet, but these outlets can't be included in your count for having one every 4'. The code may require an outlet to serve the appliance - I didn't install anything like this so I wouldn't remember - but I'd be very surprised if you had to move it for some reason. Shouldn't this have been resolved at the rough in inspection?

Re: A Building Code question for you folks

#7

Re: If I remember correctly...

Glenn Madsen near San Francisco

>Well, the rough in inspection took place sometime around 1949, as best I can tell. ;-) There really hasn't been much more than the very minimum done to this place over the last 40 years.

We spent about 4 weeks patching, sealing, and painting ceilings, walls and floors, and I got new appliances and basic cabinets and counter tops into the kitchen. The place functions for the family of 4.5 people pretty well.

But there was no budget for reworking the electrical, the heating, or some of the exterior parts. When the owner decides to sell, we're ready to buy, and she knows that. And there's an electrician who's really good, with whom I've worked, played golf, and attended church for close to 30 years, who will bring his boys over, and give it a good working through. But that will be several thousand dollars, and really isn't critical right yet, since they are renting.

Thanks for the answers!

Re: A Building Code question for you folks

#8

Re: If I remember correctly...

Bill from Montreal

>2005 NEC - 422.16 (B) (4) - Range Hoods

This article was added to the 2005 Code to allow range hoods to be cord-and-plug connected under specific prerequisite conditions. The Code requires that if a receptacle is installed for a range hood, this receptacle must be supplied by an individual branch circuit. In the past, a receptacle supplying a lighting circuit could be used for a range hood. The reason for the change is because vent hoods are sometimes removed making room for a microwave oven. Microwaves require individual branch circuits, thus the change. If the range hood is directly connected without a cord, the individual branch circuit is not required.

Re: A Building Code question for you folks

#9

Re: If I remember correctly...

Glenn Madsen near San Francisco

>Thank you, sir.

I'm not planning on moving the circuit box now, or rewiring the kitchen. But when, and if, we (the family) buy the house, there will be a major electrical overhaul budgeted.