Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Follow up to Garmin GPS thread... *LINK*

Posts

Follow up to Garmin GPS thread... *LINK*

#1

Follow up to Garmin GPS thread... *LINK*

Tom

>I just noticed it, and it's slipped down the page a bit. It's not often I find a tool/product that does something very useful and does it perfectly well too, for a decent price. If you have a Garmin gps, do yourself a favor and get this. You won't have to mess around with adhesive tapes on your windshield or dashboard, or those suction cups that often don't hold. It makes using your unit in multiple vehicles awful easy too (like rentals). Make sure your Garmin uses the same type of ball/socket mount with charger built-in. It works with my 650....

If the link doesn't work, go to Amazon and search for 'garmin friction mount.'


The best spent $27 ever, IMHO...

Re: Follow up to Garmin GPS thread... *LINK*

#2

Velcro...

Basil Biberdorf

>If you've got one of the Garmin Nuvi models (or similar small unit with a flat back, like the TomTom ONE series), a square or two of industrial velcro on a bare spot of dash (if you have one) works great. I place the loop (soft) side on the unit, and the hook side on the dash. Black velcro on a black dash is nearly invisible.

I may have to consider the friction mount for my old 1996 Camry, though, as it has very little empty dash space.

Re: Follow up to Garmin GPS thread... *LINK*

#3

Good product

JohnKJordan in East TN

>I bought one of these years ago and have it on the dash of my truck at the moment. It's pretty good, but will still slide of course with hard driving. Do NOT treat your dash with Armor All or other silicone spray!!

They also make a model which is 100% secure which attaches permanently with a double-sided adhesive. They claim you can remove it without damage, but I haven't tried. I use this type on the dash of one of my jeeps. (For mounting on a 4-wheelers, I use velcro and a screw that goes in a threaded hole in the bottom.)

They have different brackets for different models to fit the same base - I have brackets for three of my Garmin units.

JKJ

Re: Follow up to Garmin GPS thread... *LINK*

#4

Re: Follow up to Garmin GPS thread... *LINK*

Tom

>And yet another follow up.. If yours is the 4.3" widescreen and it didn't come with a case of any sort (650 doesn't, not sure about 660), this is a cheap and easy solution. Note, if you have a 3.5" non-widescreen, it won't fit. I've got two extras sitting here because I was hoping it would. It does fit my 650 perfectly though.


soft sided case for garmin widescreen