Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

OT epoxy painting basement floor

Posts

OT epoxy painting basement floor

#1

OT epoxy painting basement floor

Tom

>Well, our sump pump had a problem over the weekend and now we have piles of soggy carpeting, baseboard and (soon)18" strips of drywall on the driveway waiting for garbage day. I don't want to do carpeting again. If my window didn't fail, or my sump pump didn't fail, I don't think there would have been any water in the basement for the 5 years we've been here. I'm thinking of just painting it with a color-chip epoxy paint. Any suggestions, recommendations (thinks I might find at Home Depot or Menards would be nice)?

Re: OT epoxy painting basement floor

#2

Good idea

Charles R. Smith from Victoria

>I epoxied mine using a kit from Home Depot. I think it's a very good idea, though a bit expensive -- I did two coats, just to get a thicker and smoother surface that would stand up to harsh treatment. It's a simple process.

I love how it is much easier to keep the floor clean (presuming that I bother to sweep it). And the concrete feels nicer to walk on. I also did my garage, but it is covered in wood chips from my lathe, so I haven't seen that floor in a while.

The surface is slipperier than regular concrete, so I am careful when walking on it when covered by wood chips.

Charles

Re: OT epoxy painting basement floor

#3

Re: OT epoxy painting basement floor

John Veerkamp

>I just used a good quality concrete paint for my basement floor. It has help up fairly well for 5 years now. A lot cheaper than epoxy and easily repairable.

John

Re: OT epoxy painting basement floor

#4

Re: OT epoxy painting basement floor

Tom O'Connor

>I used a one part epoxy that Home Depot sells and it has held up well in my basement shop for about 5 years

Re: OT epoxy painting basement floor

#5

Moisture level in substrate

Nathan

>Be careful with epoxy on concrete that has recently been under water. That moisture has to dry out completely before the epoxy will adhere to the concrete. Also the concrete substrate has to be completely clean (no oil slicks, etc.) and vacuumed. You probably know all this already. I have epoxy-on-concrete in the shop and the basement. It's good but not easy on the feet when in the shop all day.