Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Router table fence *LINK*

Posts

Router table fence *LINK*

#1

Router table fence *LINK*

Bill Houghton, Sebastopol, CA

>Visiting from the quiet side...

I've got an older Porter-Cable 698 router table, which would be a pretty decent table except the stock fence for it is awful. I tried adapting a garage sale fence for it, but it turned out to be warped. I may make my own, but am looking at purchase possibilities.

The table itself is 17+". I've mounted T-tracks on each side, at roughly 17-5/8" center to center. Most of the aftermarket fences I've found are way larger than this one.

The fence from the Bench Dog contractor's table looks about right, if they sell it separately; I've e-mailed them. Anyone have experience with this fence, or have suggestions for a fence that would fit?


Bench Dog fence

Re: Router table fence *LINK*

#2

Re: Router table fence *LINK*

Jim

>I have one and am happy enough with it.

Amazon has the fence only for sale.


Bench Dog fence at Amazon

Re: Router table fence *LINK*

#3

Re: Router table fence

Kelly Anderson

>I have that exact table/fence and when I decided to put my router table in the table saw wing I just made it so I could use the Bench Dog fence. It works great. I have never had any problems with it. I do not use the router table every day though so I don't know how it would stand up to really heavy use but I like mine.

Re: Router table fence *LINK*

#4

Re: Router table fence

Roger Lance in GR, Michigan

>Bill...I've got that router table also and agree that the stock fence was awful...I replaced it with one I made using the original mounting holes to secure it to the table (which is not an issue for you as you now have those t-tracts)...was able to work in dust collection in the fence (still get a lot of dust falling through the table of course), have the split fence adjustable, and can also attach feather boards. Wish I could show a picture but I'm computer challenged. Basically made a small version of Norm's router table fence...big improvement and keeps this small PC table a useful tool in the shop. Good luck to you.

Re: Router table fence *LINK*

#5

NOw looking at Hartville tool fence

Bill Houghton, Sebastopol, CA

>available, great price, good reviews in FWW last year. Anyone with good or bad experiences with it?

Re: Router table fence *LINK*

#6

Re: I have the 32" Profence

Larry Clinton At Frankfort (Central)., Indiana

>A little gloat, I bought it in the box at an auction for $30. I have a shop built router table, love the fence. it is very easy to adjust, has included shims that are provided to offset the fences, dust collection is pretty good using a shop vac. When I get TUIT I intend to hook up the table to the Central Vac.

Re: Router table fence *LINK*

#7

Thanks for info

Bill Houghton, Sebastopol, CA

>I was going to need the fence from their contractor's table, which is not listed as a separate item. When I called them yesterday, I got routed to a message that said, in essence, we're too busy right now so call back.

Hartville Tool was quite responsive (had to wait there, because their customer service staff is a bit light this week or they're getting lots of post-Christmas phone calls). I wound up talking with their tech guy for 20 minutes or more about the Hart Tool fence, which got good reviews in FWW last year, and ordered that. On sale, too, so it was just US$60 (with shipping and a hardware kit to install wood faces, $72).