Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Audio electronics v. dust

Posts

Audio electronics v. dust

#1

Audio electronics v. dust

Dave Mount

>For years I've gotten by in the shop with a small cheapo boom box for music. Although I have both direct dust collection and an air filter, there is still some fugitive dust then ends up getting on things. Up 'til now, I've just shrugged at that, given the boom box a quick vacuum every once in a while and figured if it gets wrecked by the dust, so it goes, I'm not out much.

While I've gotten by on this, the radio station options up here in northern MN are, well, limited to be charitable. SWMBO decided, and I agree with her, that I need to upgrade my equipment, most likely to include the capacity to access internet-based radio. She made a move in this direction as a gift, but I'm leery of having electronics that have open ventilation. Wrecking a $30 boom box with dust is one thing, doing the same to equipment costing multiple hundreds is something else. There are lots of sealed speaker options that I can plug my MP3 player into, but that only plays music I have -- I'd like to access internet radio to be introduced to new (or new to me) stuff. I know about Sirius and XM, but over the net you can get the same or similar with only minimal advertising, and there are even more choices.

So, my questions are two:

1) Has anyone come up with a workable way to protect "open cooling" electronics from shop dust; and/or

2) Does anyone have recommendations for equipment that is intrinsically dust resistant (e.g. sealed boxes that cool through external fins rather than having holes in the case).

As added info, my shop is not attached to the house, so placing the equipment in an adjacent space and just running the speaker wires in is not an option. I'm aware that there are wireless speaker systems, but I've heard mixed opinions on their quality, plus that still puts the "controls" a sprint through winter weather away from me.

I thought about fabricating a case with a home made positive pressure "respirator" that would actively bring air in through filter media, with the idea that the controls could be open because the airflow is outward, but having something that was intrinsically dust insensitive sounds even better.

Any suggestions appreciated,

Dave

Re: Audio electronics v. dust

#2

Re: Audio electronics v. dust

teflon_jones

>You should look at marine grade stereos. They're designed to keep out water, which is even more pervasive than dust. They usually have minimum cooling requirements because they're not very well ventilated.

Re: Audio electronics v. dust

#3

Re: Audio electronics v. dust

Chicago Bob

>I have used the Bosch shop radio with built-in MP3 Cd player in my somewhat dusty shop for over 2 years now with absolutely no issues. Excluding the more "rugidized" case in comes in, I have no extra cooling or filtration for dust. I also got a "low end" XM sportscaster portable receiver (<$50) that retransmits to an FM sigal that is received on my Bosch radio, so I also have access to the full XM channel availability in my shop. I particularly enjoy the old time radio shows on XM as well as SEC football. Actually, I can receive XM signal on any radio in my house. (the signal of the XM radio FM output can be significantly increased by setting the receiver/transmitter on a 12" x 12" steel or copper plate)

Bottom line, you may have to clean the CD player head every few months but I would not be concerned about damage to the radio.

Re: Audio electronics v. dust

#4

I've croaked . . .

steve mackay

>two casset machines and a computer CD drive in my time in the shop no matter how hard I tried to cover the stuff. After seven years the computer itself still runs great though.

Re: Audio electronics v. dust

#5

Re: Audio electronics v. dust

DizD

>I am in process of moving my old computer to the shop this week - primarily for audio sreaming. ( I like the pandora.com site)

I had seen ads for dust covers so did a Google search and came up w/ tons of hits. Decided to give "Shopshield" from Computer Dust Solutions Store a try (www.computerdust.com) On the homepage, in addition to the product, is an illustration of "101 unsafe tablesaw practices."

Hope to have it in next week.

Re: Audio electronics v. dust

#6

Make sure . . .

steve mackay

>once you get a look at it you let us know what you think. I KNOW, deep in my heart, I need something !